Firework Ignitor Series(Ⅱ)

Glorious fireworks shine in the color of the night, which look like flowers in bloom.

However, it is dangerous to ignite fireworks in short distance. To reduce potential danger of skin burn, the best choice for Igniting firework is to use the remote controller.
We try to demonstrate how to use the firework ignitor system to ignite electric igniter for firework.
First, we prepare receiver box of firework ignitor system and 1 transmitter as well as 1 electric igniter.

Connection and Operation:
Connect two wires of electric igniter to red and black terminals of the receiver.
Switch on the receiver after connections.

Press button, ignite electric igniter.

Short Video：

Caution:
Any inflammable and explosives material must be far away when igniting fireworks.
Anyone is far away from the firework more than 50m when it is ignited.

Firework Ignitor Series(Ⅰ)

People always launch fireworks to celebrate festivals or large events all over the world. Dazzling fireworks bring us splendid visual sense. But at the same time, they bring some accidents when they are improper used. To reduce potential danger of skin burn and accidental explosions, we can use remote control system to ignite fireworks. That will be a better method to enjoy launching fireworks in festivals.

We will try to ignite firework with remote controller.
Material preparation:
1× receiver box of firework ignitor system
1×transmitter
1×electric firework

Connection and Operation:
Connect two wires of electric firework to red and black terminals of the receiver.
Switch on the receiver after connections.

Press button, ignite firework.

 

Short Video:

Caution:
Any inflammable and explosives material must be far away when igniting fireworks.

Anyone is far away from the firework more than 50m when it is ignited.

Voltage Input Triggered Remote Control Design to Applying to Device Control another Device

Someone said he needs a device that can connect to an existing 110V light switch. When the light switch is ON, the device sends a wireless signal to another 110V outlet to turn on a light that is plugged into that outlet. When the 110V light switch is OFF, the device turns the outlet off.
One voltage input triggered remote control set came up in my mind. CB-2V,  the characteristic of the transmitter CB-2V will be triggered by DC power 5~28V input.
I tried to give a demonstration of that remote control set to show how it works.
Material preparation:
1 x transmitter, CB-2V
1 x receiver, S1X-AC220-ANT2
2 x lights
1 x adaptor
1 x power strip
Power supply

Let’s see the wiring procedure.
Step 1
I connected the transmitter to the 12V adaptor and pluged lamp 2 to power strip. Then pluged the transmitter to power strip.
Step 2
I connected lamp 1 to the receiver and connected the plug to the receiver.

When pressing the button on the power strip, the lamp is on and the transmitter CB-2V sends a wireless signal “ON” to the receiver S1X-AC220-ANT2, it will make another lamp on.

When pressing the button on the power strip again, the lamp is off and transmitter CB-2V sends a wireless signal “OFF” to the receiver S1X-AC220-ANT2, it turns another lamp off.

Short Video

How to Operate Swimming Pool Light and Pool Pump with Toggle Mode Remote Control Kit

More and more families have swimming pools in their houses or villas. They can swim in the scorching summer with joy. Surely, when the night falls, swimming pool will become more beautiful with lighting. In addition, there is usually swimming pool pump for drawing water into the swimming pool. We always switch them on and off one by one. It is not convenient to do so. To remote control them is a great idea for us. Most of us want to be able to control both independently using one remote control with multiple button.

Using this rf 2 channels toggle remote control set is very favorable for this situation.
Pool light and pool pump can be controlled by two different relays independently and they won’t have interference for each other. Toggle mode makes that each button on the transmitter can only control one device.
Here shows the demonstration.
Material preparation:
1×transmitter
1×receiver
1×light
1×AC motor
Power supply
We make sure wire the correct relay to the corresponding device. Paired with relay 1, AC motor connects to the L&N terminals of relay 1 on the receiver. Likewise, the light connects to the L&N terminals of relay 2 on the receiver. The receiver should be powered.

Pressing button 1, the motor rotates.

Pressing button 1 again, the motor stops rotating.

Pressing button 2, the light is turned on.

Pressing button 2 again, the light is turned off.

 

 

 

 

 

 

 

1 Channel High Power Long Distance Control Set Designed for Vacuum Motor

I have a central vacuum system. The motor is located in the garage. I want to be able to plug the motor into a receiver so I can turn it on and off from a wireless RF remote control. The garage is 100 ft from the house.
I try to use this high power long distance control set. S1PX-AC220-ANT2 & CB-2.
First I will prepare some materials. Transmitter and receiver, AC motor, power supply.
Wiring picture is as follow.
The AC motor connects to the receiver and the receiver is powered by 220V.

Pressing big button, the motor begins to rotate.

Pressing small button, the motor stops to rotate.

Long Range Automatic Water Pumping System

Recently, I found a product which is specially designed for controlling the water pump motor. It is long range automatic water pumping system.

There are some remarkable characteristics of this new product. The supplier add external extend antenna which makes the transmitting distance of this system as long as 2000m. There are two operation methods of this remote controller. The first method is to control water pump motor with manual controller. The second method is to control water pump motor automatically by two mini water level sensors.
The manual operation is fairly easy. When pressing the big button of the transmitter, CB-2, the “ON” signal will be sent to the receiver. The receiver will instruct water pump motor to pump water into the tank. When pressing the small button of the transmitter, CB-2, the “OFF” signal will be sent to the receiver. The receiver will instruct water pump motor to stop pumping water.
Pumping water automation by water level sensors is the highlight of this product. The key technology is the transmitter, CB-2N-2, which is designed to have 3 external wires. They named them wire 1, wire 2 and wire 3. The three wires will be connected to two mini water level sensors.
Let’s show you how it works.
First step, it is installation.
Put the water level sensor 1 downwards and install at the low water level position; Put the water level sensor 2 upwards and install at the high water level position.

 

Two wires of the water level sensor 1 are connected to wire 1 and wire 3 of transmitter CB-2N-2.
Two wires of the water level sensor 2 are connected to wire 2 and wire 3 of transmitter CB-2N-2.

Motor should be connected to A&B terminal and L&N terminal of receiver S1PUA-AC220-ANT2.

Second step:
When water reaches the low water level, two wires of the water level sensor 1 is connected and the transmitter is triggered. The transmitter will send an ‘ON”’ signal to the receiver. The receiver will instruct the water pump motor to pump water into the tank.

When water reaches the high water level, two wires of the water level sensor 2 is connected and the transmitter is triggered. The transmitter will send an “OFF” signal to the receiver. The receiver will instruct the water pump motor to stop pumping water.

One to Many Remote Control System

Lisa is an electrical supervisor for Lighting Services Company. They are a big installer of festive lighting and have been asked by some of their clients if they can supply remote switch to turn on and off all the lights which are controlled at the same time. She needed 1 transmitter and 8 receivers all working on the same channel. The receivers will need to 240v and be capable of controlling 980 watts lights totally. She wondered if there is a system with one transmitter and 8 receiver units with antenna.
So she was looking for any favorable products on the internet. She found a kind of one to many remote control system.
This control system operating voltage is AC110~240V. It is very favorable for this customer’s need.
They are long range remote control kit.
Lisa wanted to prepare 1 transmitter and 8 receivers to control 8 lights simultaneously like the following picture.

Each of receivers will be paired with a light.
Wiring operation is fairly simple. Lisa told me the method which the supplier showed to her.
Wires from light are supposed to be connected to the output terminal of the receiver. We do it one by one. And receivers must be all powered by 240V power supply.
Here is the demonstration from the supplier.



Pressing the big button, 2 lights will be turned on simultaneously.

 

Pressing the small button, 2 lights will be turned off at the same time.