Wireless Wall Switch and AC Receiver Remote Control Home Lamp

We made a remote control kit which consists of a wall-mounted switch and a remote receiver (S1X-AC220&HR-1).

When we use ordinary switch to switch home appliances off and on, we should do some wiring for home appliances, some time it is very complicated and time- consuming. Our RF wireless wall mounted switch looks like universal switch from appearance, but it is wireless and operate by RF signal that can pass through walls, floors and doors. It is can be simply affix to any place you want by double faced adhesive tape.

Through RF signal, you don’t have to wire between switch and appliances. Wall-mounted switch works with remote receiver to remote control ac lamp.
Here is the wiring diagram.

Wire ac lamp to OUTPUT of receiver. And add power supply to receiver. This kind of receiver is designed for AC output terminals so that lamp can get power from output terminals of receiver directly.
Setting different control modes (We usually set toggle for lamp controlling.)
Setting control mode Toggle: Only connect Jumper-2.
Press button: Turn on the relay, terminal OUT outputs AC power, turn on lamp.
Press button again: Turn off the relay, terminal OUT no output, turn off lamp.

Wireless Remote Control Electric Door Locks

Question from customer:
I need one transmitter and 2 receivers that the transmitter operates separately. Preferably 12 volt receivers will work out to 300 yards. I am using the receivers to operate door locks on a project I’m working on.
Answer:
We recommend you 2000m remote control system input & output 12V (S1X-DC12-ANT2&CB-2). One transmitter (CB-2) can pair up with 2 receivers (S1X-DC12-ANT12), so you can use one transmitter remote control two receivers. With external extend antenna, its transmitting distance can reach about 2000m (2187yards) in the open field. It is 12volt actuated, that is to say, electric door lock doesn’t need to be supplied additional power supply because electric door lock will get power from powered receiver.

Wiring is simply easy. Wire your electric door lock to A&B terminals of receiver.

Operation:
Setting control mode Latched: Do not connect Jumper-1 and Jumper-2.
Press big button: Turn on the relay, terminal A&B output DC power, open the door.
Press small button: Turn off the relay, terminal A&B no output, close the door.

Timed Digital Tube Circuit Board Control Motor's Rotation

Digital Tube Electric Board Temperature Control Setting and Remote Controlling Motor

This product is 12VDC power input. 

With manual control function, remote control function, temperature control function for automatic working, it can be used in various fields, including industry and household.  

Control System is widely used to control lights, motors, fans, electrically operated doors / locks / windows / blinds / cars or other appliances.

There are 2 working modes in it. Momentary mode and Latched Mode

Working distance is about 100m.

 

Video of Digital Tube Electric Board Temperature Control Setting :

 

Video of Digital Tube Electric Board Temperature Remote Controlling Motor

 

 

 

Phone Smart GSM Power Socket

This tri-frequency/tri-band GSM smart power socket has manual control, state checking function and power-off memory function other than phone call remote control and SMS remote control.

Manual Control
Press buttons SW1/SW2/SW3 on the socket directly to remote control the socket. Press SW1, socket 1 is socket 1 is power-on state. Press SW1 again, socket 1 is power-off state. Press SW2, socket 2 is power-on state. Press SW2 again, socket 2 is power-off state. Press SW3, socket 3 is power-on state. Press SW3 again, socket 3 is power-off state. When devices are plugged into sockets, only press buttons on the socket, you can switch on or off those devices.

CHECK command: Check the state of the socket
Edit text message “SN+ Six passwords +CHECK” and send to socket. You will receive the state of the socket. Then you will know the ON or OFF state of each socket.

Power-off Memory Function of Socket
The power-off memory function of socket is default in socket.
The STA 1 light flashes twice after power is on. It means that the state is power-off memory function is saved.
The STA 1 light flashes 4 times after power is on. It means that the state is power-off memory function is not saved.
Power-off state can be changed by the customer. Press SW1 for 12 seconds then release, you can change the current memory state.
Note:
This product can only control power supply on or off and do not have other functions. If some devices don’t have power-off memory function of it, even you want to start it by using this socket, it won’t work immediately. You have to turn on its own switch to restart it.
Reset to default
Press the SET button and SW1 button at the same time for 1 second, the STA1 light will flashes twice slowly. You reset socket successfully.
The previous preset owner number will be deleted and password becomes six zeros: 000000. The three switches are also disconnected.

How to Use Phone to Remote Control Devices On and Off

Our new product mobile phone GSM smart power strip is used in many fields, for example industry or household. It is applied to air conditioner, electric heaters, water pump, motors, fans, servers, relay station, TVs, water heaters, electric doors, rice cookers, lamps, speakers or other devices with voltage AC110~220V. Or something special remote controlling, you can also feed your pet via this GSM switch. How to use this socket on earth? Let’s see the following procedure.

Here we want to introduce “Phone call Remote Controlling” method.
When you use the owner number to dial, the phone will be gotten through after 2 seconds. Voice prompt: “Welcome to use the smart socket. Please enter the password and end up with “octothorp”. Then do follow the voice prompt. When your password is correct, the voice prompts is “The password is correct”. If your password is correct, you can remote control devices which are plugged into those sockets via your mobile phone or fix telephone. This product can only control power supply on or off and do not have other functions. So you can only turn on and off devices.
When you input the password with illegal format or even wrong password, the voice prompts is “The password is wrong, please input again” .You are allowed to input password incorrectly three times. If more than three times, the voice prompt is: “Thank you for using, goodbye” and hang up after 2 seconds.
Attention: Socket can be controlled many times. When you want to stop controlling, press asterisk (star key) and octothorp (hash key), the voice prompts is “Thank you for using, goodbye” and hang up after 2 seconds.

Normally Open and Closed Contact Wiring

In a switch where the contacts remain in one state unless actuated, the contacts can either be normally open (abbreviated “n.o.” or “no“) until closed by operation of the switch, or normally closed (“n.c.” or “nc“) and opened by the switch action. Our remote receiver can be grouped into two types according to its current output modes. They are normally open/closed switch connection or current direct output connection (Controlled device can get power from powered receiver directly).
Recently, one customer sent a picture of “Normally Open/Closed Receiver Connecting to an AC Lamp” to us to ask whether it is correct or not.

Unfortunately, it is a wrong wiring. Please see a red cross to the lamp wiring from the following picture. This red cross points out the wrong wiring. AC lamp should not wire to the normally open terminals of receiver because there is no current through them which are only equivalent to a switch.

The correct wiring is as follow. This is the 1 channel normally open/ closed ac receiver (S1U-AC220) wiring. AC lamp is connected to normally open terminals B&C. And add a wire between terminals B&N and another wire to terminals C&L. At last, wire a plug to terminals L&N. Then, we finish the wiring.

WlLAN iOS System WIFI Controller for DC Motor Controlling

WF-8-1R(iOS System)
Smartphone WIFI Controller now supports 4.6 ~ 6.1 version iOS system other than 2.1 ~ 4.0
version Android software system. It is another choice of controlling device when you use
iPhone, iPad or iPod Touch. Its controlling software is installed in your iPhone, iPad or iPod
Touch by iTunes.

This video shows how to use iPOD to control  DC motor.

Smartphone WIFI Controller for LED Lamp

Smartphone WIFI Controller now supports 4.6 ~ 6.1 version iOS system other than 2.1 ~ 4.0 version Android software system. It is another choice of controlling device when you use iPhone, iPad or iPod Touch. Its controlling software is installed in your iPhone, iPad or iPod Touch by iTunes.
This video shows how to use iPOD to control LED light strip.

Operational Video:

Wireless Remote Control 4 LED Strip Lights

In this video we show you one of applications for 4 Channel DC RF Wireless Transmitter Receiver. We use it to control 4 led strip lights.

 

Mobile Phone WIFI Controller Ignites Firework

Mobile Phone WIFI Controller
Feature:
WIFI interface, control via WIFI connection
8-channel high-current relay output
Super mini size
Stable performance
Automatically obtain IP
Up to 32 Client connections for TCP Server mode
With external antenna for longer range
Support 2.1 ~ 4.0 version Android software system
CE and FCC certification
Applications:
Applied in modern agriculture field, smart home, instruments, equipment control
WiFi remote control lights, motors, fan, electric doors / windows, aircraft, remote cars, remote toys, rolling blinds, pumps, winches, or other electrical devices with voltage AC110~240V or DC0~28V.

Mobile phone wifi controller became a transmitter to ignite fireworks paired with receiver when it installed our wifi software.

 

Remote Control Car Sun Shade

Car shades are another common way to protect the vehicle besides sun blinds. The shades for the rear and front windows are designed to be unfolded and sit against the window. These shades are used to protect the vehicle and the passengers from direct sunlight. What’s more, the U.V ray will penetrate car window and can not escape that the car gets hot. So you need car sun shade to protect yourself and your car. And if you could use a remote controller to control those shades which are activated by motor, It might be very convenient and leisurely.


We are going to control motor to make sun shade up and down with this 2 channel momentary remote switch.

Firstly you need to prepare:
1 x 2 channel dc momentary remote control receiver (S2M-DC12)
1 x 2-button remote transmitter
2 x dc 12v power adapters
Some lines

Secondly, see the wiring diagram below, C is normally open terminal; A normally closed terminal and B common terminal. Connect terminal C to the positive and connect terminal A to the negative. Terminal B is supposed to be connected to the motor.
Note: The Power supply of receiver and motor must be provided individually in order to avoid interference between them.


Operation:
Press and hold button 1, the motor rotates in positive direction; Release button 1, motor stops rotating.

Press and hold button 2, the motor rotates in reverse direction; Release button 2, motor stops rotating.

Only to press buttons to control car sun shade in your car to avoid direct sunlight and even protect your own privacy in the daytime. It is simple and convenient.

Short Video:

DC Motor is Activated by Time Delay Remote Module

Reversing motor can be applied to conveyors, awnings, winches, electrically operated doors / windows / blinds or other electrical devices. To make the motor rotate in positive and reversal direction, we try to use this kind 2 channels adjustable time delay remote control kit to control dc motor.
Firstly we prepare:
1 x 2 channel delay time adjustable receiver (S2DA-DC12)
1 x 4-button transmitter(C-4)
2 x dc 12v power supply
Some lines

Secondly, see the wiring images below; C is normally open terminal; A normally closed terminal and B common terminal. Connect terminal C to the positive and connect terminal A to the negative. Terminal B is supposed to be connected to the motor.



Thirdly, it comes to operation
At first, we set delay time 8 seconds for relay 1 and 10 seconds for relay 2. Then switch on power.
Press button 1, the motor rotates continuously in the positive direction.

If we want to interrupt the rotation, we can press button 3, the motor stops rotating immediately.

Press button 2, motor rotates continuously in the reverse direction.

If we want to interrupt the reverse rotation, press button 4, the motor stops right away.

Time Delay Mode
Press button 1, the motor positive rotation will last 8 seconds which is set in advance, then stops rotating.


Press button 2, the motor reverse rotation will last 10 seconds which is preset, then stops rotating.

Far-Ranging 1 Channel Remote Controls Doorbell

Someone want to install a single channel remote to control his doorbell within the range of 100m. The old 12V doorbell was broken because of the construction which cannot be repaired. Ordinary wireless doorbell cannot be used because of distance. I has an idea that a transmitter is connected to the doorbell button and relay in receiver is connected to doorbell. The only problem is the control range of remote need to reach about 100m.


We recommend the long range dc power receiver S1U-DC12-ANT2 and one button transmitter CP-1.

Working voltage range of receiver is 12V. With normally open and close terminal, the voltage of the device being controlled is AC110~240V or DC0~28V. So it can be applied in 12V doorbell. And the most significant is that it has extended external antenna which makes its control range up to 2000m (6000ft). You will be satisfied with this product.
According to your requirement, you can connect the button of the bell to the transmitter by two wires. Then connect the bell to the relay in the receiver.
Setting control mode Momentary: Connect Jumper-1.
When you press the button of the bell, RF signal will be sent out from transmitter to receiver. The receiver receives to turn on the relay, then the doorbell rings. Release the button, the doorbell stops ringing.

Published from blogger— Traffic Lights Controlling Simulation

A man needs a remote switch that will operate 3 12V DC light circuits or outlets. He wants to control traffic lights, Circuit 1 Red Light, Circuit 2 Green Light, Circuit 3 Yellow light. When green is on, red and yellow are off; when red is on, yellow and green are off; when yellow is on, green and red are off.

We would like to recommend a 4-channel remote control kit. Remote distance is about 100 meters.

Let’s do a demonstration of this remote control.
First, we should prepare some material for this demonstration.
1×transmitter
1×receiver
1×solderless breadboard
1×red led indication light
1×yellow led indication light
1×green led indication light
some lines
DC 12V power supply

Step 1:
Connect three led indication lights to the solderless breadboard and connect them to the receiver.

Step 2:
Connect to 12 V power supply.
Step 3:
Operation
Press button 1, switch on red light and turn off other lights.

Press button 2, switch on green light and turn off other lights.

Press button 3, switch on yellow light and turn off other lights.

 

 

 

Control Patio Lamp Carefree

 

 

 

When the night falls, lamps in the patio will be lighted on. How beautiful lighting in the patio! But it may be not convenient to you to switch it on and off to touch the manual switch back and forth when you are enjoying yourself in the patio. Are there any effective fixtures to solve this problem? You may choose remote controller. You don’t have to do some complicated wiring and remote control it  leisurely and carefree.
This direct voltage output long-range remote control kit is favorable. It includes long distance remote transmitter and receiver with magnetic mount antenna. You wire the light to the receiver and touch button on remote transmitter to control the light on and off from any place within reliable distance. Transmitting signal can pass through walls, floors and doors. Working distance is up to 2000M (6000 feet) theoretically.

 

Remote Control Compact Flurorescent Lamps in Basement

I want to remote control two compact flurorescent lamps which are both 90W 220V in the basement from the ground floor. So I need to buy a set remote controller kit. It will be installed in the basement and will be controlled by one controller. I can control  from the ground floor leisurely and carefree.

So I chose this kind of great range remote controller set.

 

 

 

 

Its receiver is 2 channels and with external extended mount antenna. And its transmitter has 2 buttons. At first, I can do some wiring according to our application circuit.

 

That is so easy to operate
I choose “Toggle Mode”. Only connect Jumper-2.
Press big button: Turn on the lamp1. Press big button again: Turn off the lamp1.
Press small button: Turn on the lamp2. Press small button again: Turn off the lamp2.
.

 

 

 

Smart WiFi Controller

Recently,I want to use my mobile phone to remote control home appliances.  I found a mobile phone WiFi controller on the Internet which is so favorable for me to do so. Each controller has 8 relays for  connecting 8 devices respectively.
There are 3 requirements

1. WiFi and Android system can be supported in mobile phone.
2. Devices controlled must be connected to receiver and turn on WiFi.
3. The control software can be installed into mobile phone.

So  the supplier show me his product and make some demonstrations.

It is about the setting. There are three indication LED in the controller.  The power LED, the WiFi start-up LED , the WiFi connection status LED. The power LED light is on. With the shining of the WiFi start-up LED light, we turn on WiFi of mobile phone. The WiFi connection status LED light is on. We press the control software installed in the mobile phone and press the ”Connect”.

Working modes include Toggle Mode, Momentary Mode, Latched Mode and Time Delay Mode as well as “All on”&”All off”.
Toggle Mode:

Momentary Mode:

Latched Mode:

Time Delay Mode:

ALL ON:

ALL OFF:

It is very helpful for me to establish my home WiFi network. I can press buttons on my mobile phone to control home appliance at ease.