2 Channel Power Outage Memory Function Remote Controller

We recommend this 2 channel power-off memory function remote controller (S2MU-DC06/09/12/24 & C-2). It can work in 4 kinds of voltage, 6V, 9V, 12V and 24V. There 4 working modes in it. You can switch as you want through connection or disconnection of jumpers. It controls lights, motors, fans, electrically operated doors / locks / windows / blinds / cars or other appliances with voltage AC110~240V or DC0~28V. It is great for hard to reach lights or other DC/AC electrical devices. The working transmission is about 100m in the open field. With function of memory, if the power is cut off, the relay will return automatically to the previous status after the power is restored.

We’d like to show the wiring and controlling of ac, dc lamps.
The contact of relay of each receiver is normally open/ closed. So you need to wire ac lamp or dc lamp to normally open contact B&C and supply AC 220V power or dc power to lamp.



Usage:
Setting control mode Toggle: Only connect Jumper-2.
Control mode Toggle: Press -> On; Press again -> Off.
Setting control mode Momentary: Only connect Jumper-1.
Control mode Momentary: Press and hold -> On; Release -> Off.

Setting control mode Latched: Do not connect Jumper-1 and Jumper-2.
Control mode Latched: Press -> On, another relay Off; Press another button -> Off.

Setting control mode Momentary + Toggle: Connect Jumper-1 and Jumper-2.
Control mode Momentary (Channel 1): Press -> On; Press again -> Off.
Control mode Toggle (Channel 2): Press and hold -> On; Release -> Off.