I’m looking for a wireless remote that I can use to create a simple on off switch to 4 AC lights fixtures for living room, bed room, kitchen, shower room’s illumination. Do you have a recommendation for which wireless remote or RF transmitters may be better choice for this task?
Answer:
We recommend model 4Channel AC110V~220V Remote Controller – 1 Transmitter & 4 Receivers (4S1T-AC110/220V+CV-4). The AC RF remote control switch system, which is one transmitter pairs with four receivers. With about 500 meters range (theoretically), it can widely used in lights / lamps , motors, fans, cameras, video signals, audio signals, garage doors, electric shutter doors, telescopic doors, windows, cars, etc. This remote control has a toggle control mode which is the only working mode in it. It is a low cost remote control with high quality. Extremely easy to install and use. The maximum current is 3 ampere each channel.
The light wiring is fairly simple.
Connect the neutral wire to the terminal “1”, and the live wire to the terminal “2”. Connect the lamp to the terminal “5” and the neutral wire. S o you can wire your lamps to each receiver one by one.
Operation procedure:
1) Press button 1, turn on the lamp of receiver 1. Press button 1 again, turn off the lamp of receiver 1.
2) Press button 2, turn on the lamp of receiver 2. Press button 2 again, turn off the lamp of receiver 2.
3) Press button 3, turn on the lamp of receiver 3. Press button 3 again, turn off the lamp of receiver 3.
4) Press button 4, turn on the lamp of receiver 4. Press button 4 again, turn off the lamp of receiver 4.
Holding one transmitter, you can wireless remote control your any controlled lamps of house easily because the wireless signal can pass through walls, floors and doors with reliable distance.
