Remote Control Compact Flurorescent Lamps in Basement

I want to remote control two compact flurorescent lamps which are both 90W 220V in the basement from the ground floor. So I need to buy a set remote controller kit. It will be installed in the basement and will be controlled by one controller. I can control  from the ground floor leisurely and carefree.

So I chose this kind of great range remote controller set.

 

 

 

 

Its receiver is 2 channels and with external extended mount antenna. And its transmitter has 2 buttons. At first, I can do some wiring according to our application circuit.

 

That is so easy to operate
I choose “Toggle Mode”. Only connect Jumper-2.
Press big button: Turn on the lamp1. Press big button again: Turn off the lamp1.
Press small button: Turn on the lamp2. Press small button again: Turn off the lamp2.
.

 

 

 

Firework Ignitor Series(Ⅳ)

 

 

Beautiful fireworks burst in the night. Usually, we use manual ignitor to ignite fireworks. It is so dangerous for us to ignite firework without safe distance. Accidental burning or injured happened from time to time. Why not try a safer solution with remote controller to ignite firework? Firework ignitor system may be very favorable at that time.
Let’s try to demonstrate how to use the firework ignitor system to ignite fireworks.
First, we need the following material.
1× receiver box of firework ignitor system
1×transmitter
2×electric igniters

Second, it is fairly simple connection:
Connect two wires of electric igniter 1 to Out A; Then connect two wires of electric igniter 2 to Out B. Switch on the receiver after connections.

 

 

 

 

 

Press button 1, ignite igniter 1.

 

 

 

 

Press button 1, ignite igniter 2.

 

 

 

 

Short Video：

 

Caution:

Any inflammable and explosives material must be far away when igniting fireworks.

Anyone is far away from the firework more than 50m when it is ignited.

 

 

 

 

Firework Ignitor Series(Ⅲ)

Fireworks burst at curtain of the night just like flowers in blossom, giving us stunning visual sense and bringing high spirit in festivals or big events.

However, some people may be injured during playing fireworks because of improper use. If we play fireworks by a little gadget, the accidental burning can be reduced. Firework remote controller may be a better choice when we ignite fireworks.
Let’s try to use the firework remote controller to ignite fireworks.
First, we need the following material.
1× receiver box of firework ignitor system
1×transmitter
2×electric fireworks

Second, connection is fairly simple:
Connect two wires of electric firework 1 to Out A; Then connect two wires of electric firework 2 to Out B. Switch on the receiver after connections.

Press button 1, ignite firework 1.

 

 

Press button 2, ignite firework 2.

 

 

 

 

Caution:
Any inflammable and explosives material must be far away when igniting fireworks.
Anyone is far away from the firework more than 50m when it is ignited.

How to Operate Swimming Pool Light and Pool Pump with Toggle Mode Remote Control Kit

More and more families have swimming pools in their houses or villas. They can swim in the scorching summer with joy. Surely, when the night falls, swimming pool will become more beautiful with lighting. In addition, there is usually swimming pool pump for drawing water into the swimming pool. We always switch them on and off one by one. It is not convenient to do so. To remote control them is a great idea for us. Most of us want to be able to control both independently using one remote control with multiple button.

Using this rf 2 channels toggle remote control set is very favorable for this situation.
Pool light and pool pump can be controlled by two different relays independently and they won’t have interference for each other. Toggle mode makes that each button on the transmitter can only control one device.
Here shows the demonstration.
Material preparation:
1×transmitter
1×receiver
1×light
1×AC motor
Power supply
We make sure wire the correct relay to the corresponding device. Paired with relay 1, AC motor connects to the L&N terminals of relay 1 on the receiver. Likewise, the light connects to the L&N terminals of relay 2 on the receiver. The receiver should be powered.

Pressing button 1, the motor rotates.

Pressing button 1 again, the motor stops rotating.

Pressing button 2, the light is turned on.

Pressing button 2 again, the light is turned off.