One Controller Controls 6 Stage Lamps

Jimmy is Gaffer. For a stage, he must achieve six lamps to be wirelessly and remotely controllable. These “lamps” will be placed in wooden cubes perforated, which will be moved on stage, and must be turned on and off from the technical table located 10 to 15 meters scene.

He picked out this control kit from one-to- many control series. One transmitter and 6 receivers can solve this problem. In one-to-many control series, receiver can pair with stage lamps you want to control by using a transmitter. With one transmitter at hand you will control stage lamps at ease. There is no need to walk back and forth to switch on or off stage lamps.

 

 

 

 

Those 6 receivers connect to 6 lamps respectively.
Press button 1, switch stage lamp1 on and off.
Press button 2, switch stage lamp2 on and off.
…
Press button 6, switch stage lamp 6 on and off.
Now, is one-to-many series remote controller kit not his better choice?

Remote Controllable Trailer Lights

A trailer is a container on wheels which is pulled by a car or other vehicle and which is used for transporting large or heavy items. More and more people are keen on adding trailer to his car or other vehicle. In burning hot summer, many a families will drive to seashore with their boats to be ready to sail on the sea with joy.

 

 

However, the boat on the trailer will shelter from lights of car or other vehicle. People who drive back from you cannot judge whether you want to turn or brake.

Maybe the wiring is so complicated. Why do not use a wireless remote controller to work it out? This handy, foolproof and available remote controller is your better choice. This remote controller set has two parts. One is the wireless transmitter module, the other is a receiver box. We can use wireless transmitter module and a receiver box to solve this problem.

 

 

We use module above to connect to car or trunk’s lights, and then connect receiver lights of trailer. One module and a receiver above can be applied a pair of lights of car and trailer respectively. You can connect lights as many as you want to control with two or more control kits.
When you switch on the car or other vehicles’ lights, “ON” signal will be sent to the receiver to switch on the lights of trailer. Then switch off lights, switch off the trailer’s lights.

Firework Ignitor Series(Ⅳ)

 

 

Beautiful fireworks burst in the night. Usually, we use manual ignitor to ignite fireworks. It is so dangerous for us to ignite firework without safe distance. Accidental burning or injured happened from time to time. Why not try a safer solution with remote controller to ignite firework? Firework ignitor system may be very favorable at that time.
Let’s try to demonstrate how to use the firework ignitor system to ignite fireworks.
First, we need the following material.
1× receiver box of firework ignitor system
1×transmitter
2×electric igniters

Second, it is fairly simple connection:
Connect two wires of electric igniter 1 to Out A; Then connect two wires of electric igniter 2 to Out B. Switch on the receiver after connections.

 

 

 

 

 

Press button 1, ignite igniter 1.

 

 

 

 

Press button 1, ignite igniter 2.

 

 

 

 

Short Video：

 

Caution:

Any inflammable and explosives material must be far away when igniting fireworks.

Anyone is far away from the firework more than 50m when it is ignited.

 

 

 

 

Firework Ignitor Series(Ⅲ)

Fireworks burst at curtain of the night just like flowers in blossom, giving us stunning visual sense and bringing high spirit in festivals or big events.

However, some people may be injured during playing fireworks because of improper use. If we play fireworks by a little gadget, the accidental burning can be reduced. Firework remote controller may be a better choice when we ignite fireworks.
Let’s try to use the firework remote controller to ignite fireworks.
First, we need the following material.
1× receiver box of firework ignitor system
1×transmitter
2×electric fireworks

Second, connection is fairly simple:
Connect two wires of electric firework 1 to Out A; Then connect two wires of electric firework 2 to Out B. Switch on the receiver after connections.

Press button 1, ignite firework 1.

 

 

Press button 2, ignite firework 2.

 

 

 

 

Caution:
Any inflammable and explosives material must be far away when igniting fireworks.
Anyone is far away from the firework more than 50m when it is ignited.

Firework Ignitor Series(Ⅱ)

Glorious fireworks shine in the color of the night, which look like flowers in bloom.

However, it is dangerous to ignite fireworks in short distance. To reduce potential danger of skin burn, the best choice for Igniting firework is to use the remote controller.
We try to demonstrate how to use the firework ignitor system to ignite electric igniter for firework.
First, we prepare receiver box of firework ignitor system and 1 transmitter as well as 1 electric igniter.

Connection and Operation:
Connect two wires of electric igniter to red and black terminals of the receiver.
Switch on the receiver after connections.

Press button, ignite electric igniter.

Short Video：

Caution:
Any inflammable and explosives material must be far away when igniting fireworks.
Anyone is far away from the firework more than 50m when it is ignited.

One controller controls many video cameras—How to realize?

You decided to install a security system with video camera in somewhere in you new house, the door gate, garage, porch, living room, bedrooms. Maybe you wonder whether it is possible to wire some video cameras to be controlled by one remote controller or not. We have many kinds of remote transmitters and we consider a set handy electronic gadget can help you. CB series transmitter,(http://www.ourautomation.com) Model 0021027(CB-6) is one of those transmitters, which can connect with 6 receivers. It pairs with the receiver, Model 0020360(S1UB-DC12). You can control video cameras with just one remote controller easily.

 

It is so easy to install. Look at the wiring picture.

Wires on the video camera should be connected to the receiver and power supply. From the picture, the red wire from the video camera is connected to B terminal of the receiver and the black wire is connected to negative electrode of the power supply. The positive wire of the power supply is connected to C terminal of the receiver.

The transmitter and receivers should come to the “Toggle Mode”. This means pressing each button controls each video camera on or off separately.

When press button 1, the transmitter is triggered and sends out an RF signal “ON” to the receiver. After the receiver receives the signal, the corresponding video camera is on. When press button 1 again, the transmitter is triggered and sends out an RF signal “OFF” to the receiver. After the receiver receives the signal, the corresponding video camera is off…

It is really a simple and convenient way to control all video cameras from one remote controller.

How to use infrared motion sensor to remotely control electric fan on and off?

Now we are promoting a brand new product, rf wireless remote control model of CB-2N(model 0021045). www.ourautomation.com  This is a long distance remote controller. Transmitting distance is up to 1000m in open field. The major characteristic of it is that it has two extended wires, which is wired to the electrical device. When two wires are connected, the remote will send out an rf signal “ON”. When two wires are cut, the remote will send out an rf signal “OFF”. It can be paired with the receiver, such as model 0020442 (S1PX-AC220-ANT2), used in such a situation when you want to use an electrical device to remotely control another device. For instance, use an infrared motion sensor to remotely control the electric fan by the remote & receiver set.

The infrared motion sensor could be used to directly control the electric fan. But if there is a long distance between the infrared motion sensor and the fan, it is inconvenient for wiring. You'd better use our remote & receiver set at this time.

Then how to make infrared motion sensor remotely control the electric fan by our remote controller? Next we'll talk about it.

Look at the wiring picture, two extended wires on transmitter should be connected the contacts of infrared motion sensor. The wires from fan should be connected to the output contacts of receiver.

When someone enters into the detective range, the contacts of infrared sensor are closed; transmitter is triggered and then transmits an rf signal “ON” to the receiver. After the receiver receives the signal, output contacts are closed; the fan starts to work.

When someone goes out of the detective range, the contacts of infrared sensor are cut; the transmitter is triggered and then transmits an rf signal “OFF” to the receiver. After the receiver receives the signal, output contacts are cut, the fan stops working.