Telecontrol of 4 Ceiling Lights in Indoor Stadium

The rf wireless distant control technology can be leisurely used to control  lights from outdoor as well. There are 4 big ceiling lights installed on the ceiling of an indoor stadium which managed by a PE teaching headmaster from a primary school. He must go to touch the manual switches one by one when teachers had PE class in the indoor stadium. However, ceiling lights’ switch was installed on a wall outside of stadium gate. It is not convenient to him to go back and forth. So he would like to find effective way to solve this problem.

I think that he need a distant controller to deal with this situation. A 4 channel high power great range ac distant control kit is very favourable for him. It contains 4-channel high power ac output receiver and one great range 4-button remote transmitter. Working distance of this set is 2000m (6000ft) in the open air with external magnetic mount antenna. 4-channel remote control has 4 working modes. They are toggle mode, momentary mode, latched mode and momentary +toggle mode which will satisfy his different needs.

Wiring is fairly simple. Do as the following picture shows. Wire each spotlight to each relay; use transmitter to remote control them. Four buttons control corresponding spotlight respectively.

 

Controlled Lighted TAXI Sign for Hotel Clients Remotely

A receptionist works in a very prominent hotel in downtown. He wants remotely control lighted TAXI sign outside of hotel at night (The taxi is not allowed to drive too close in front of hotel gate). When clients need to call a taxi, he only presses a button to switch on TAXI sign. The taxi drivers will drive to hotel carry clients. He can switch off TAXI sign by remote controller when drivers carry clients away.

 

 

 

 

 

 

What an exactly good idea! It is so convenience both to clients and receptionist. The practice may be not complicated if you use our wireless long range remote control kit.

 

 

 

These are transmitter and receiver. With external extended antenna of the receiver, the whole kit’s transmitting distance can reach 2000m (6000 ft). Maximum working current is 10A. The RF signal can pass through doors, walls and trees as well as other barriers. Lighted TAXI sign can be controlled remotely. Such a solution is an effective way to avoid running back and forth for hotel staff. Taxi driver will appreciate it because he carries clients in time and get earning as soon as possible. The lighted TAXI sign will be connected to the receiver as the following picture shown.

 

 

When clients need to call taxi, receptionist in hotel can press big button on the transmitter. Then the TAXI sign will shine. When taxi driver see lighted sign, he will come to drive client. When client is carried away, receptionist can press small button switch off the taxi sign. Receptionist is very pleased with the operation of the TAXI sign and enjoys the great range of the remote control.

 







 

Control Patio Lamp Carefree

 

 

 

When the night falls, lamps in the patio will be lighted on. How beautiful lighting in the patio! But it may be not convenient to you to switch it on and off to touch the manual switch back and forth when you are enjoying yourself in the patio. Are there any effective fixtures to solve this problem? You may choose remote controller. You don’t have to do some complicated wiring and remote control it  leisurely and carefree.
This direct voltage output long-range remote control kit is favorable. It includes long distance remote transmitter and receiver with magnetic mount antenna. You wire the light to the receiver and touch button on remote transmitter to control the light on and off from any place within reliable distance. Transmitting signal can pass through walls, floors and doors. Working distance is up to 2000M (6000 feet) theoretically.

 

Remote Control Compact Flurorescent Lamps in Basement

I want to remote control two compact flurorescent lamps which are both 90W 220V in the basement from the ground floor. So I need to buy a set remote controller kit. It will be installed in the basement and will be controlled by one controller. I can control  from the ground floor leisurely and carefree.

So I chose this kind of great range remote controller set.

 

 

 

 

Its receiver is 2 channels and with external extended mount antenna. And its transmitter has 2 buttons. At first, I can do some wiring according to our application circuit.

 

That is so easy to operate
I choose “Toggle Mode”. Only connect Jumper-2.
Press big button: Turn on the lamp1. Press big button again: Turn off the lamp1.
Press small button: Turn on the lamp2. Press small button again: Turn off the lamp2.
.

 

 

 

Vibrator as a Reminder in the Restaurant

A restaurant owner always receives complain of the speed of serve food. His restaurant kitchen in the basement, but the dining hall is on the first floor.

Waiters in that restaurant always didn’t realize whether dishes are done or not to serve customers in time because they actually didn’t hear call from kitchen.

He just wants to have a method of communication between kitchen staff and waiters. He is wondering if there is an effective way to solve this problem. He found that vibrator receiver is a useful gadget for his waiters.

He only put the vibrator receiver into his waiter’s pocket. When dishes ordered are done, the staffs in kitchen only press the button on the transmitter. The receiver will vibrate and remind wait to sever dishes to customers. The vibrator kit works up to 1000m and the wireless signal can pass through walls, floors and doors. The scope between kitchen and dining hall is sufficient. In addition, this vibrator is powerful enough so that the waiter will still feel the vibration when he is walking.
So waiters can serve dishes to customers as soon as they are done. Customers enjoy both delicious food and excellent customer service.

 

 

Smart WiFi Controller

Recently,I want to use my mobile phone to remote control home appliances.  I found a mobile phone WiFi controller on the Internet which is so favorable for me to do so. Each controller has 8 relays for  connecting 8 devices respectively.
There are 3 requirements

1. WiFi and Android system can be supported in mobile phone.
2. Devices controlled must be connected to receiver and turn on WiFi.
3. The control software can be installed into mobile phone.

So  the supplier show me his product and make some demonstrations.

It is about the setting. There are three indication LED in the controller.  The power LED, the WiFi start-up LED , the WiFi connection status LED. The power LED light is on. With the shining of the WiFi start-up LED light, we turn on WiFi of mobile phone. The WiFi connection status LED light is on. We press the control software installed in the mobile phone and press the ”Connect”.

Working modes include Toggle Mode, Momentary Mode, Latched Mode and Time Delay Mode as well as “All on”&”All off”.
Toggle Mode:

Momentary Mode:

Latched Mode:

Time Delay Mode:

ALL ON:

ALL OFF:

It is very helpful for me to establish my home WiFi network. I can press buttons on my mobile phone to control home appliance at ease.

How to Remote Control Two Training Systems with One Controller

We have 2 training systems that run on remote controls. 1 system requires 8 channels and 1 system requires only 4 channels. We wonder if there is any way to program a 12 channel hand-held remote to allow control of both systems with 1 hand-held remote? What would we have to order and how would we program the hand-held to “talk” to both the 8 and 4 channels remote receivers? Finally, we select 8 channels receiver for the first training system and 4 channels receiver for the second training system.

 

 

To realize one transmitter to control those two training systems, the software of those two receivers should be reprogrammed by supplier in advance. And choose this 12 buttons transmitter to control both two receivers.

Button 1 to Button 8 control the first training system. Button 9 to Button 12 control the second system.

One Controller Controls 6 Stage Lamps

Jimmy is Gaffer. For a stage, he must achieve six lamps to be wirelessly and remotely controllable. These “lamps” will be placed in wooden cubes perforated, which will be moved on stage, and must be turned on and off from the technical table located 10 to 15 meters scene.

He picked out this control kit from one-to- many control series. One transmitter and 6 receivers can solve this problem. In one-to-many control series, receiver can pair with stage lamps you want to control by using a transmitter. With one transmitter at hand you will control stage lamps at ease. There is no need to walk back and forth to switch on or off stage lamps.

 

 

 

 

Those 6 receivers connect to 6 lamps respectively.
Press button 1, switch stage lamp1 on and off.
Press button 2, switch stage lamp2 on and off.
…
Press button 6, switch stage lamp 6 on and off.
Now, is one-to-many series remote controller kit not his better choice?

Remote Controllable Trailer Lights

A trailer is a container on wheels which is pulled by a car or other vehicle and which is used for transporting large or heavy items. More and more people are keen on adding trailer to his car or other vehicle. In burning hot summer, many a families will drive to seashore with their boats to be ready to sail on the sea with joy.

 

 

However, the boat on the trailer will shelter from lights of car or other vehicle. People who drive back from you cannot judge whether you want to turn or brake.

Maybe the wiring is so complicated. Why do not use a wireless remote controller to work it out? This handy, foolproof and available remote controller is your better choice. This remote controller set has two parts. One is the wireless transmitter module, the other is a receiver box. We can use wireless transmitter module and a receiver box to solve this problem.

 

 

We use module above to connect to car or trunk’s lights, and then connect receiver lights of trailer. One module and a receiver above can be applied a pair of lights of car and trailer respectively. You can connect lights as many as you want to control with two or more control kits.
When you switch on the car or other vehicles’ lights, “ON” signal will be sent to the receiver to switch on the lights of trailer. Then switch off lights, switch off the trailer’s lights.

Automatic Controllable Pool Cover by Remote Controller

With the benefits of safety, convenience, water conservation, energy efficiency and easier maintenance, swimming pool covers have increased being used for many families recently. People prefer to use automatic pool cover. Automatic covers cover and uncover the pool by pushing a button which makes more convenience.
However, for those automatic covers, maybe, we need to come over pool to switch them on and off.  At that time,  you may just want a remote controlled antomatic pool cover. Have you ever thought about that you can use a remote controller to control the autoatic pool cover within a long distance?
We need a receiver box to install to motor of your pool cover and a transmitter to instruct the receiver to work.
This handy gadget can make high power AC motor rotate forward and reverse.

Here is the wiring picture:

Operation:
We aim to how to make this remote controllable automatic pool cover work in this step.  After wiring, we press button A to open pool cover with motor rotate in forward direction. Press button C, the motor stop rotating. We press button B to close pool cover with motor rotate in reversal direction. Press button C, the motor stop rotating.
Through remote controlling motor of pool cover rotate forward and reverse, we can control it open or close in a reliable distance anytime.

Firework Ignitor Series(Ⅳ)

 

 

Beautiful fireworks burst in the night. Usually, we use manual ignitor to ignite fireworks. It is so dangerous for us to ignite firework without safe distance. Accidental burning or injured happened from time to time. Why not try a safer solution with remote controller to ignite firework? Firework ignitor system may be very favorable at that time.
Let’s try to demonstrate how to use the firework ignitor system to ignite fireworks.
First, we need the following material.
1× receiver box of firework ignitor system
1×transmitter
2×electric igniters

Second, it is fairly simple connection:
Connect two wires of electric igniter 1 to Out A; Then connect two wires of electric igniter 2 to Out B. Switch on the receiver after connections.

 

 

 

 

 

Press button 1, ignite igniter 1.

 

 

 

 

Press button 1, ignite igniter 2.

 

 

 

 

Short Video：

 

Caution:

Any inflammable and explosives material must be far away when igniting fireworks.

Anyone is far away from the firework more than 50m when it is ignited.