DC12V Remote Switch Controls Winch Motor Rotation and Lamps On and Off

Question from customer:
I am in need of a controller. I will be using this to control a winch on my pickup and some lights. So I need one button momentary for line in, one button momentary for line out, and 2 buttons on/off for lights.
Answer:
4 Relay multi-mode On / Off remote controller (S4U-DC12 & C-4) is very suitable to you. There are 4 channels for more than one device. It has universal controlling mode, including toggle, momentary, latched, and Momentary+toggle modes. The maximum current is 10A and working distance is about 100m. It features in controlling lights, motors, fans, electrically operated doors / locks / windows / blinds / cars or other appliances with AC110~240V or DC0~28V. You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors.

According to your requirement, Channel 1~2 are for motor and Channel 3~4 are for lamps. At first, please see the wiring. Wire winch motor to “B” terminals of relay 1 and relay 2. That makes motor rotate in two different directions. Supply power to winch motor. Secondly, wire two lamps to “B” terminals of relay 3 and relay 4. Supply power to lamps.

Thirdly, learning Momentary (Channel 1~2) + Toggle (Channel 3~4) control mode: When the receiver is in the status of LEARNING, press button 3 of the transmitter.
When you press and hold button 1, winch motor rotates in positive direction; release it, winch motor stops.
When you press and hold button 2, winch motor rotates in reverse direction; release it, winch motor stops.
When you press button 3, turn on lamp 1; press button 3 again, turn off lamp 1.
When you press button 4, turn on lamp 2; press button 4again, turn off lamp 2.

2000M 4 Channel DC 9V 12V 24V RF Remote Control Switch 10A

This is the 4 channel multi-mode dc RF remote control kit. Control Lights, Motors, Fans, electrically operated Doors/Locks/Windows/Blinds/Cars or Other Appliances with AC110~240V or DC0~28V.
You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors.
There are 4 working modes for your requirement. With the external extend antenna, its working distance can reach 2000m(6000ft) in open field.

Operational Video:

2CH RF DC Remote Control Kit Controls AC Motor

This 2CH RF DC remote control kit is activated by DC power supply, which operates in toggle, momentary, latched and toggle +momentary modes (just set according to your requirement).It is very favorable for lights or other DC/AC electric devices which are hard to reach or far away from switch. This 2 channel remote control kit can help you complete two operations at the same time. It is widely used for lights, gates, garage doors, motors and so on.
We will try to show you how to control positive and reversal rotation of an AC motor with this remote module.

One Transimtter to Many Receivers— Control 4 Lamps

The receiver is designed for one-transmitter-many-receivers system. There are two channels for each receiver. You can use 2 receivers with transmitter CV-4 or CB-4. You also can choose external antennas for them. With the extended external antennas, the transmitting distance will reach about 2000m in the open air. This kit is also a multi-mode remote control which includes four working modes, toggle, momentary, latched and momentary+toggle.

 

Smart WiFi Controller

Recently,I want to use my mobile phone to remote control home appliances.  I found a mobile phone WiFi controller on the Internet which is so favorable for me to do so. Each controller has 8 relays for  connecting 8 devices respectively.
There are 3 requirements

1. WiFi and Android system can be supported in mobile phone.
2. Devices controlled must be connected to receiver and turn on WiFi.
3. The control software can be installed into mobile phone.

So  the supplier show me his product and make some demonstrations.

It is about the setting. There are three indication LED in the controller.  The power LED, the WiFi start-up LED , the WiFi connection status LED. The power LED light is on. With the shining of the WiFi start-up LED light, we turn on WiFi of mobile phone. The WiFi connection status LED light is on. We press the control software installed in the mobile phone and press the ”Connect”.

Working modes include Toggle Mode, Momentary Mode, Latched Mode and Time Delay Mode as well as “All on”&”All off”.
Toggle Mode:

Momentary Mode:

Latched Mode:

Time Delay Mode:

ALL ON:

ALL OFF:

It is very helpful for me to establish my home WiFi network. I can press buttons on my mobile phone to control home appliance at ease.