How to change an ordinary portable socket to an RF remote control portable socket

    Long time ago, infrared remote controlling system has appeared and now it is still widely used in our daily life. For instance, using infrared remote controller to control TV set, air-conditioner, light, shutter, door and so on.
   Now, I believe that you may hear something about remote control socket which uses the infrared to send signal to turn on or off the socket so that it can supply or cut off power to devices. That is an innovative idea of the use of infrared. But infrared remote controlling has its defects. The major defect is a point and click operation system. You have to have the remote control in the line of site of devices themselves. There is no exception with infrared remote control socket. You may still have to find the infrared received terminal on the socket and aim at it with transmitter like you use any of infrared control gadgets. If you go to another place which is far away from the controlled appliance, you cannot do that because of poor signal blocked by door, wall or something else.
   But the rf remote control system can help you to solve this problem that it can penetrate non-transparent objects and fixed barriers to transmit signal. That is to say, it can transmit signal through door, wall or in a long range. We may feel free and convenient when using this system.
   How to change an ordinary portable socket to an RF remote control portable socket on earth? A  little gadget to refit your ordinary socket. They are the S1PX-AC220 & C-2 controller kit.
   First, we need the following gadget.

  
    Then, we should prepare a socket, a plug and a lamp and power supply other than the transmitter and receiver.

  
   The wiring processing is very simple.
Step 1, we connect the plug wires to the input terminal of the receiver.

Step 2, the wires from the socket should be connected to the output terminal of the receiver.

Step 3, we insert the plug to power supply and switch, the power LED light in the receiver shine at once.

Step 4, the lamp’s plug is inserted to the socket.

The wiring processing finished.

Step 5, press button 1, the lamp turns on.

Step 6, press button 2, the lamp turns off.

  That is really a simple way to change an ordinary socket to an RF remote control socket. If you have this kind of socket, it is so convenient to you. You can switch on or off any devices plugged into the socket.

To use the remote control to delay the driving of the fan

Summer will come soon. The temperature is becoming higher and higher. Fans and air conditioner are necessary. My friend  wanted to buy a remote controller to control switch delay. She would like it to control the fan in bedroom to turn off automatically after her daughter slept. It is very energy-saving and money-saving. So I found the following remote control kit, Model 0020258(S1DA-AC220+C-2)

The major characteristic of this model is switch delay. It has a timer in the receiver. So we can adjust delay time from 0 second to 99 hours according to their requirement.
 The wiring is also very easy.

From the wiring picture, wires from the fan should be connected the B&C terminal of the receiver respectively. First of all, Press buttons of “+” and “—” on the timer and adjust delay time. If customer wants to fan be off after 2 hours, he will set “H 0 2”, it means the delay time is 2 hours. Then we press button 1, the fan begins to work. After delayed time, the fan will turn off by itself .If we press button 2, the fan is turned off immediately. There is no need to wait for delay time.  

One remote controller control some shutters in the house simultaneously

Recently, my friend moved into his new house, a very spacious house. He intended to buy remote controllers to control his reversible motors shutters. He wants one transmitter to control 4 shutters in each room. The Model 0020337(S1FM-DC12&CV-2) is favorable for him. This set of controller can make the motor rotate in forward and reversal direction.
This is the transmitter and receiver. From the transmitter, we can see two buttons on it.
Button ▲ on transmitter & receiver is for forward direction. Button ▼ on transmitter & receiver is for reversal direction.

My friend wants to control like this:

Each of the receivers should learn code from the transmitter so that the transmitter can control 4 receivers simultaneously.
Here is the wiring picture.
Each motor of the shutter should be connected to the receiver one by one. Every receiver should be connected to the power supply.

He presses and holds button ▲ on transmitter. With the motors of shutters working continuously in “UP” direction, shutters go up slowly. When he releases the button ▲, the motors stop moving. When we press the hold button ▼, the motor works continuously in “DOWN” direction, shutter go down slowly.

To lift heavy stuff with winch controlled by remote controller easily

    My grandparents are farmers who always store the grain in the warehouse in every harvest season. But the warehouse sometimes is an attic. They usually have to hoist grain bag to the attic by themselves in the past. Actually, that is energy-consuming working. It is too difficult for aged grandparents to hoist those heavy bags of grains now. So they want to know if there is an easier way to hoist grain.
So I choose this set of controller, Model 0020337（S1FM-DC12&CV-2）which is strongly recommended by the supplier. They said the major characteristic of this receiver is to make the motor in the winch rotate in positive and reversal direction. That is to say, the rope of winch will be stretched out and drawn back by wireless remote controller. The transmitter is also easy to use for my parent.
Here are transmitter and receiver.

    We install immediately. The wires from the winch are connected to the receiver. Then we just try to lift heavy stuff. We hook up the bag, pressing and holding button ▲ on transmitter. With the motor of winch working continuously in the “UP” direction, the rope is drawn back and the bag is hoisted; When the bag is hoisted to the attic, release button ▲, the motor of winch stops working. After putting away the grains bag, we press and hold button ▼ on transmitter, the motor works continuously in the “DOWN” direction , the rope is stretched out and then it reaches the ground.

   My grandparents are very delight to use it to hoisted grain to the attic. Of course, this remote control winch can help them to do other things easily.

Pumping water automatically with remote control system

   James starts to manage a farm since this year. He needs to pump water to tank in the water tower for irrigation every day. At the beginning, James installed a water level sensor which is connected a gadget with two indication lights. When red light flashing, it means that the water level is low. He needs to switch on the water pump by hand. When the green light flashing, it means that the water level reaches the high level. Gradually, it is tired of him to run to 1000m away to monitor whether water level in the tank gets low or high and switch on or off the pump motor every day. So James would like something will send signal which can make switch of the motor turn on to pump water automatically. So how can he combine pump motor and water level senor with remote controller? Recently,  he just found a new remote control kit promoted , model 0020522 (S1L-DC12-ANT2+CB-2N). With the combination of those two gadgets, using a water level senor to remotely control the water pump motor is no longer a Gordian knot. This is a long distance remote controller kit. Transmitting distance is up to 1000m in open field.

   In addition, the supplier said the major characteristic of CB-2N is that it has two extended wires, which is wired to the electric device. When two wires are connected, the rf signal ”ON” will be sent out; When two wires are disconnected, the rf signal “OFF” will be sent out. That is easy to operate.

    The extended wires on transmitter should be connected to the water level sensor. The red wire from the motor is connected to the C terminal of the receiver and black wire from the motor is connected to the negative electrode of the power supply. The positive wire of the supply power is connected to B terminal and positive electrode of the receiver. The negative electrode of the power supply of power supply and receiver are connected together.

   When the water level gets low, it makes the contacts of water sensor are closed; with extended wires of transmitter connection, the transmitter is triggered and transmits an RF signal “ON” to the receiver. The receiver output contacts are closed after received the signal, the pump begins to pump water. When the water gets high, it makes the contacts of water sensor are cut; the transmitter is triggered and transmits an RF signal “OFF” to the receiver. The receiver output contacts are cut after received the signal, the pump stops pumping water.

One controller controls many video cameras—How to realize?

You decided to install a security system with video camera in somewhere in you new house, the door gate, garage, porch, living room, bedrooms. Maybe you wonder whether it is possible to wire some video cameras to be controlled by one remote controller or not. We have many kinds of remote transmitters and we consider a set handy electronic gadget can help you. CB series transmitter,(http://www.ourautomation.com) Model 0021027(CB-6) is one of those transmitters, which can connect with 6 receivers. It pairs with the receiver, Model 0020360(S1UB-DC12). You can control video cameras with just one remote controller easily.

 

It is so easy to install. Look at the wiring picture.

Wires on the video camera should be connected to the receiver and power supply. From the picture, the red wire from the video camera is connected to B terminal of the receiver and the black wire is connected to negative electrode of the power supply. The positive wire of the power supply is connected to C terminal of the receiver.

The transmitter and receivers should come to the “Toggle Mode”. This means pressing each button controls each video camera on or off separately.

When press button 1, the transmitter is triggered and sends out an RF signal “ON” to the receiver. After the receiver receives the signal, the corresponding video camera is on. When press button 1 again, the transmitter is triggered and sends out an RF signal “OFF” to the receiver. After the receiver receives the signal, the corresponding video camera is off…

It is really a simple and convenient way to control all video cameras from one remote controller.

A more convenient way to control light remotely

   Sometimes, you may get up in the mid-night to drink water or go to the toilet. At that time, it is inconvenient to find the switch of the wall light in dark house. Or you all know the experience of getting so comfortable in front of TV, snack at hand and ready for your favorite show when all of a sudden, you realise you forget to turn off the light in the kitchen. You are not willing to miss that wonderful TV program and to waste energy. So you need a remote controller to control the light. We would like to recommend this controller, (www.ourautomtion.com)   Model 0020392(S1X-AC220&C—2). This receiver, S1X-AC220 can apply to the appliances with AC 100~240V. The rf signal which is sent out by the transmitter, C-2, can pass the through walls, floors and door. You can turn off the light even though you are far away from it. 

Look at the wiring picture, at first, the zero wire and live wire of power supply should be connected to the input contacts of receiver. Then, the wires from wall light should be connected to the output contacts of receiver. 

 And then, the transmitter and receiver should come to be “Latched Mode”. When you press the button 1, transmitter is triggered and then transmits an RF signal “ON” to the receiver. After the receiver receives the signal, output contacts are closed; the wall light is on.

 When you press the button 2, the transmitter is triggered and then transmits an RF signal “OFF” to the receiver. After the receiver receives the signal, output contacts are cut, the wall light is off.