A more convenient way to control light remotely

   Sometimes, you may get up in the mid-night to drink water or go to the toilet. At that time, it is inconvenient to find the switch of the wall light in dark house. Or you all know the experience of getting so comfortable in front of TV, snack at hand and ready for your favorite show when all of a sudden, you realise you forget to turn off the light in the kitchen. You are not willing to miss that wonderful TV program and to waste energy. So you need a remote controller to control the light. We would like to recommend this controller, (www.ourautomtion.com)   Model 0020392(S1X-AC220&C—2). This receiver, S1X-AC220 can apply to the appliances with AC 100~240V. The rf signal which is sent out by the transmitter, C-2, can pass the through walls, floors and door. You can turn off the light even though you are far away from it. 

Look at the wiring picture, at first, the zero wire and live wire of power supply should be connected to the input contacts of receiver. Then, the wires from wall light should be connected to the output contacts of receiver. 

 And then, the transmitter and receiver should come to be “Latched Mode”. When you press the button 1, transmitter is triggered and then transmits an RF signal “ON” to the receiver. After the receiver receives the signal, output contacts are closed; the wall light is on.

 When you press the button 2, the transmitter is triggered and then transmits an RF signal “OFF” to the receiver. After the receiver receives the signal, output contacts are cut, the wall light is off.