2014/03/13
Triple Function of Vibrator and Beeper
Tri-mode
RF wireless remote vibration & beeper kit (Z-06+C-1).
There are three working modes for this gadget. They are vibration, beep and
vibration + beep modes. It can be used in calling, animals training, alert device,
reminder…
2014/03/03
High Power Winch Motor Remote Controlling
Question from customer:
Hi, I am looking for a 110 volt remote control for a winch that pulls my boat from the water into my boat house.
Requirements:
120 volt
20 amps max
Momentary switches
Do you have a kit that meets these requirements?
Answer:
First, we’d like to recommend motor momentary remote controller (S1FM-AC220&CV-2-2). It can remote control motors of rolling blinds/ doors, projection screens, awnings, pumps, winches, conveyors or other electric appliances and machineries. With 2 directive buttons ▲(Positive rotation) and ▼(Reversal rotation), you can rotate the motor in the positive or reversal direction with the transmitter (remote control) from any place within a reliable distance(this kind of remote controller is 500m/1500ft). Power supply is AC 100~240V. But this maximum current is 10amps, it is not enough for you to remote control your 20amps winch. So we’d like show you contactor motor starter relay, you can use it amplify current which you need. AC contactor (aka motor starter) is a high capacity relay. It is often used to control a motor or as a main power switch. It’s used for long range connection and circuit disconnection, frequent activation and controlling AC motor.
Here is the wiring diagram. Two contactors will act as a bridge between remote controller and high power motor to help activate high power motor to rotate in positive and reversal position.
Wire A1 terminal of contactor 1 to UP terminal of receiver, and A1 terminal of contactor 2 to DOWN of receiver. Wire T2 terminals of contactors 1&2 to winch motor. Wire winch motor to COM terminal of receiver. Supply power to receiver and contactor 1&2 respectively.
Operation:
Press and hold button ▲ on remote: Motor rotates continuously in positive direction.
Release button ▲ on remote: Stop the motor.
Press and hold button ▼ on remote: Motor rotates continuously in reversal direction.
Release button▼ on remote: Stop the motor.
Hi, I am looking for a 110 volt remote control for a winch that pulls my boat from the water into my boat house.
Requirements:
120 volt
20 amps max
Momentary switches
Do you have a kit that meets these requirements?
Answer:
First, we’d like to recommend motor momentary remote controller (S1FM-AC220&CV-2-2). It can remote control motors of rolling blinds/ doors, projection screens, awnings, pumps, winches, conveyors or other electric appliances and machineries. With 2 directive buttons ▲(Positive rotation) and ▼(Reversal rotation), you can rotate the motor in the positive or reversal direction with the transmitter (remote control) from any place within a reliable distance(this kind of remote controller is 500m/1500ft). Power supply is AC 100~240V. But this maximum current is 10amps, it is not enough for you to remote control your 20amps winch. So we’d like show you contactor motor starter relay, you can use it amplify current which you need. AC contactor (aka motor starter) is a high capacity relay. It is often used to control a motor or as a main power switch. It’s used for long range connection and circuit disconnection, frequent activation and controlling AC motor.
Here is the wiring diagram. Two contactors will act as a bridge between remote controller and high power motor to help activate high power motor to rotate in positive and reversal position.
Wire A1 terminal of contactor 1 to UP terminal of receiver, and A1 terminal of contactor 2 to DOWN of receiver. Wire T2 terminals of contactors 1&2 to winch motor. Wire winch motor to COM terminal of receiver. Supply power to receiver and contactor 1&2 respectively.
Operation:
Press and hold button ▲ on remote: Motor rotates continuously in positive direction.
Release button ▲ on remote: Stop the motor.
Press and hold button ▼ on remote: Motor rotates continuously in reversal direction.
Release button▼ on remote: Stop the motor.
2014/02/13
Digital Tube Electric Board Temperature Control Setting and Remote Controlling Motor
With
manual control function, remote control function, temperature control function
for automatic working, it can be used in various fields,
including industry and household.
Control
System is widely used to control lights, motors, fans, electrically operated
doors / locks / windows / blinds / cars or other appliances.
There
are 2 working modes in it. Momentary mode and Latched Mode
Working
distance is about 100m.
Video of Digital Tube Electric Board Temperature Control Setting :
Video of Digital Tube Electric Board Temperature Remote Controlling Motor
2014/02/10
Phone Smart GSM Power Socket
This tri-frequency/tri-band GSM smart power socket has manual control, state checking function and power-off memory function other than phone call remote control and SMS remote control.
Manual Control
Press buttons SW1/SW2/SW3 on the socket directly to remote control the socket. Press SW1, socket 1 is socket 1 is power-on state. Press SW1 again, socket 1 is power-off state. Press SW2, socket 2 is power-on state. Press SW2 again, socket 2 is power-off state. Press SW3, socket 3 is power-on state. Press SW3 again, socket 3 is power-off state. When devices are plugged into sockets, only press buttons on the socket, you can switch on or off those devices.
CHECK command: Check the state of the socket
Edit text message “SN+ Six passwords +CHECK” and send to socket. You will receive the state of the socket. Then you will know the ON or OFF state of each socket.
Power-off Memory Function of Socket
The power-off memory function of socket is default in socket.
The STA 1 light flashes twice after power is on. It means that the state is power-off memory function is saved.
The STA 1 light flashes 4 times after power is on. It means that the state is power-off memory function is not saved.
Power-off state can be changed by the customer. Press SW1 for 12 seconds then release, you can change the current memory state.
Note:
This product can only control power supply on or off and do not have other functions. If some devices don’t have power-off memory function of it, even you want to start it by using this socket, it won’t work immediately. You have to turn on its own switch to restart it.
Reset to default
Press the SET button and SW1 button at the same time for 1 second, the STA1 light will flashes twice slowly. You reset socket successfully.
The previous preset owner number will be deleted and password becomes six zeros: 000000. The three switches are also disconnected.
Manual Control
Press buttons SW1/SW2/SW3 on the socket directly to remote control the socket. Press SW1, socket 1 is socket 1 is power-on state. Press SW1 again, socket 1 is power-off state. Press SW2, socket 2 is power-on state. Press SW2 again, socket 2 is power-off state. Press SW3, socket 3 is power-on state. Press SW3 again, socket 3 is power-off state. When devices are plugged into sockets, only press buttons on the socket, you can switch on or off those devices.
CHECK command: Check the state of the socket
Edit text message “SN+ Six passwords +CHECK” and send to socket. You will receive the state of the socket. Then you will know the ON or OFF state of each socket.
Power-off Memory Function of Socket
The power-off memory function of socket is default in socket.
The STA 1 light flashes twice after power is on. It means that the state is power-off memory function is saved.
The STA 1 light flashes 4 times after power is on. It means that the state is power-off memory function is not saved.
Power-off state can be changed by the customer. Press SW1 for 12 seconds then release, you can change the current memory state.
Note:
This product can only control power supply on or off and do not have other functions. If some devices don’t have power-off memory function of it, even you want to start it by using this socket, it won’t work immediately. You have to turn on its own switch to restart it.
Reset to default
Press the SET button and SW1 button at the same time for 1 second, the STA1 light will flashes twice slowly. You reset socket successfully.
The previous preset owner number will be deleted and password becomes six zeros: 000000. The three switches are also disconnected.
2014/02/08
How to Use Phone to Remote Control Devices On and Off
Our new product mobile phone GSM smart power strip is used in many fields, for example industry or household. It is applied to air conditioner, electric heaters, water pump, motors, fans, servers, relay station, TVs, water heaters, electric doors, rice cookers, lamps, speakers or other devices with voltage AC110~220V. Or something special remote controlling, you can also feed your pet via this GSM switch. How to use this socket on earth? Let’s see the following procedure.
Here we want to introduce “Phone call Remote Controlling” method.
When you use the owner number to dial, the phone will be gotten through after 2 seconds. Voice prompt: “Welcome to use the smart socket. Please enter the password and end up with “octothorp”. Then do follow the voice prompt. When your password is correct, the voice prompts is “The password is correct”. If your password is correct, you can remote control devices which are plugged into those sockets via your mobile phone or fix telephone. This product can only control power supply on or off and do not have other functions. So you can only turn on and off devices.
When you input the password with illegal format or even wrong password, the voice prompts is “The password is wrong, please input again” .You are allowed to input password incorrectly three times. If more than three times, the voice prompt is: “Thank you for using, goodbye” and hang up after 2 seconds.
Attention: Socket can be controlled many times. When you want to stop controlling, press asterisk (star key) and octothorp (hash key), the voice prompts is “Thank you for using, goodbye” and hang up after 2 seconds.
Here we want to introduce “Phone call Remote Controlling” method.
When you use the owner number to dial, the phone will be gotten through after 2 seconds. Voice prompt: “Welcome to use the smart socket. Please enter the password and end up with “octothorp”. Then do follow the voice prompt. When your password is correct, the voice prompts is “The password is correct”. If your password is correct, you can remote control devices which are plugged into those sockets via your mobile phone or fix telephone. This product can only control power supply on or off and do not have other functions. So you can only turn on and off devices.
When you input the password with illegal format or even wrong password, the voice prompts is “The password is wrong, please input again” .You are allowed to input password incorrectly three times. If more than three times, the voice prompt is: “Thank you for using, goodbye” and hang up after 2 seconds.
Attention: Socket can be controlled many times. When you want to stop controlling, press asterisk (star key) and octothorp (hash key), the voice prompts is “Thank you for using, goodbye” and hang up after 2 seconds.
订阅：
博文 (Atom)