RF Motor Remote Controller with Limit Switch

 

This RF Motor Remote Controller (S1FD-AC220 & CA-4) features forward-reverse-stop capability. You can rotate the motor in positive or reversal direction by  transmitter from any place within a reliable distance, wireless signal pass through walls, floors and doors. With time delay function, the working time of positive / reversal rotation can be adjusted from 10 to 60 seconds. It is suitable for the motors of rolling blinds / doors, projection screens, awnings, pumps, winches, conveyors or other electrical devices.
Operational Video:

Smartphone WIFI Controller for LED Lamp

Smartphone WIFI Controller now supports 4.6 ~ 6.1 version iOS system other than 2.1 ~ 4.0 version Android software system. It is another choice of controlling device when you use iPhone, iPad or iPod Touch. Its controlling software is installed in your iPhone, iPad or iPod Touch by iTunes.
This video shows how to use iPOD to control LED light strip.

Operational Video:

DC RF Remote Control for AC Motors

This 6 channel rf remote control switch can be used to control lights, motors, fans, electrically operated doors / locks / windows / blinds / cars, etc. 6 channel enables it to switch 6 electrical devices on and off. Remote distance is up to 500m. Three voltages include dc9v, dc12v and dc24v.
This video aims to show how to control 2 AC motor.

2000M 4 Channel DC 9V 12V 24V RF Remote Control Switch 10A

This is the 4 channel multi-mode dc RF remote control kit. Control Lights, Motors, Fans, electrically operated Doors/Locks/Windows/Blinds/Cars or Other Appliances with AC110~240V or DC0~28V.
You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors.
There are 4 working modes for your requirement. With the external extend antenna, its working distance can reach 2000m(6000ft) in open field.

Operational Video:

Remote Control RV's Flood Lights

Question from customer:
I want to use this remote kit to operate 4 ea.-12 volt flood lights on my RV (recreational vehicle) from inside my automobile if backing up at nighttime. I would keep one remote in my truck and one in the RV. Will this be a problem that the remote inside my truck will be at a distance of about 50 feet from the receivers inside the RV?

Answer:
We recommend you 4 models of high power dc remote switch with direct power output (S1PX-DC12) and 2 long range transmitters (CB-4). Direct power output; controlling lights, motors, fans, electrically operated doors/locks/windows/blinds/cars or other appliances. You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors. When it pairs with the long range transmitter, the working distance will reach 500m (1600ft) in the open field. There is no need to worry about the distance. The most important point is that encoding of receivers is same as the code of transmitters. So they can work together.


Wiring:
The wiring is very simple. According to the wiring diagram, each light should be connected to corresponding receiver and place to appropriate position. Each receiver is supplied 12V power supply.


Usage:
There are 3 operational modes. Toggle, momentary and latched modes.
Setting control mode Toggle: Only connect Jumper-2.
Press big button: Turn on the relay.
Press big button again: Turn off the relay.
Setting control mode Momentary: Only connect Jumper-1.
Press and hold big button: Turn on the relay.
Release big button: Turn off the relay.
Setting control mode Latched: Do not connect Jumper-1 and Jumper-2.
Press big button: Turn on the relay.
Press small button: Turn off the relay.
You can choose latched mode since you have two transmitters. As regards the latched mode, it is motivated by relay group. For relay group, only one relay will be on at a time. To be more specific, when you control the light by latched mode, you should prepare at least two buttons remote. Press button A, the light is on; press button B, the light is off.
Button A&B of first transmitter can control the first light. Button C&D of the first transmitter can control the second light.
Button A&B of second transmitter can control the third light. Button C&D of the second transmitter can control the fourth light.

A Transmitter Remote Control 2 Sirens—2000M

Question from Customer:
Hello, I would like some help to decide on what system to choose. We have a siren in a building 750m away that we would like to trigger, it is 240v. I would also like to use the same remote to activate a 12v siren 1.2km away. Is it possible for one remote to trigger two different sirens?
Answer:
We recommend you two different receivers, one is long range ac power direct output receiver (S1X-AC220-ANT2), and other is long range dc power direct output receiver (S1X-DC12-ANT2). AC receiver is used to connect to 240V siren. DC receiver is used to connect to 12V siren. You can only use 2-Button transmitter (CB-2) to control all of them. With the extended external antenna, both receivers’ working distances reach 2000m (6000ft).

Usage:
There are three working modes in each receiver.
1) Setting control mode Toggle: Only connect Jumper-2.
Press button 1: Turn on the relay.
Press button 1 again: Turn off the relay.
2) Setting control mode Momentary: Only connect Jumper-1.
Press and hold button 1: Turn on the relay.
Release button 1: Turn off the relay.
3) Setting control mode Latched: Do not connect Jumper-1 and Jumper-2.
Press button 1: Turn on the relay.
Press button 2: Turn off the relay.
In your case, you can set ‘Toggle Mode’. Press the button of remote, turn on the device; press the button again, turn off the device. Toggle mode is motivated by single relay, which means you can work this mode with single button remote. So one 2-Button transmitter is enough for you to control two sirens. Press big button, turn on the 240V siren; press again, turn off the 240V siren. Press small button, switch on the 12V siren; press again, switch off the 12V siren.
Wiring:
240V siren is connected to AC receiver’s OUTPUT terminal. And supply 240V power supply. 12V siren is supposed to connect to DC receiver’s A&B terminal. And supply 12V power supply.

Lamps are Controlled by Time Delay Receiver and Motion Detectors

We will try to make 2 motion detector led lamps with infrared motion detectors (W-01) and 2 channel rf receiver with time delay function (S2DA-DC12). The working distance of motion detector is 100m (open field). This delay time is adjustable and user-selectable. Delay time can be adjusted as you like within 0 second~99 hours.

 Operation Video: