Wireless Standard Light Switch and RF Receiver for AC Lamp

Question from customer:
I want switch on and off my porch light. But I don’t want do some wiring from porch to inside of my house. I want switches which can be mounted or glued to a wall. I’d like to use standard light switch fixtures as well if possible.
Can you recommend me anything that solves this situation?
Answer:
We’d like recommend this 6VDC 1 button wireless calling button with adhesive-tape and 1 channel AC220V receiver (S1X-AC220). Calling button is a part of wireless calling system, here we pair it with a wireless RF receiver to make a remote control system.

Wireless calling button is the hi-tech electronic product which is integrated wireless communication and computer technology. Usually it pair with a wireless receiver host. However, ordinary RF receiver can work with it too as long as they paired.
It is widely applied to restaurants, coffee shops, karaoke rooms, discos, sauna rooms, beer houses, pubs, night clubs, bowling alleys, golf courses, video halls, hotels, hospitals, schools, chain stores ,shops…
Wireless calling button simply stick to wall or desk by double-adhesive tape on its back. You can stick to anywhere you want. There is no need wiring from switch to lamp. Your light can be wired to the receiver and do not need supply additional power to light because it can get power from receiver.
Here is the receiver wiring diagram.


Press the “CALL” button, turn on porch lamp.
Press the “CALL” button again, turn off porch lamp.

Triple Function of Vibrator and Beeper

Tri-mode RF wireless remote vibration & beeper kit (Z-06+C-1). There are three working modes for this gadget. They are vibration, beep and vibration + beep modes. It can be used in calling, animals training, alert device, reminder…

Motor Running Timing Setting of LED Tube Circuit Board Controller

Timed Digital Tube Circuit Board Control Motor's Rotation

High Power Winch Motor Remote Controlling

Question from customer:
Hi, I am looking for a 110 volt remote control for a winch that pulls my boat from the water into my boat house.
Requirements:
120 volt
20 amps max
Momentary switches
Do you have a kit that meets these requirements?

Answer:
First, we’d like to recommend motor momentary remote controller (S1FM-AC220&CV-2-2). It can remote control motors of rolling blinds/ doors, projection screens, awnings, pumps, winches, conveyors or other electric appliances and machineries. With 2 directive buttons ▲(Positive rotation) and ▼(Reversal rotation), you can rotate the motor in the positive or reversal direction with the transmitter (remote control) from any place within a reliable distance(this kind of remote controller is 500m/1500ft). Power supply is AC 100~240V. But this maximum current is 10amps, it is not enough for you to remote control your 20amps winch. So we’d like show you contactor motor starter relay, you can use it amplify current which you need. AC contactor (aka motor starter) is a high capacity relay. It is often used to control a motor or as a main power switch. It’s used for long range connection and circuit disconnection, frequent activation and controlling AC motor.

Here is the wiring diagram. Two contactors will act as a bridge between remote controller and high power motor to help activate high power motor to rotate in positive and reversal position.

Wire A1 terminal of contactor 1 to UP terminal of receiver, and A1 terminal of contactor 2 to DOWN of receiver. Wire T2 terminals of contactors 1&2 to winch motor. Wire winch motor to COM terminal of receiver. Supply power to receiver and contactor 1&2 respectively.
Operation:
Press and hold button ▲ on remote: Motor rotates continuously in positive direction.
Release button ▲ on remote: Stop the motor.
Press and hold button ▼ on remote: Motor rotates continuously in reversal direction.
Release button▼ on remote: Stop the motor.

Digital Tube Electric Board Temperature Control Setting and Remote Controlling Motor

This product is 12VDC power input. 

With manual control function, remote control function, temperature control function for automatic working, it can be used in various fields, including industry and household.  

Control System is widely used to control lights, motors, fans, electrically operated doors / locks / windows / blinds / cars or other appliances.

There are 2 working modes in it. Momentary mode and Latched Mode

Working distance is about 100m.

 

Video of Digital Tube Electric Board Temperature Control Setting :

 

Video of Digital Tube Electric Board Temperature Remote Controlling Motor

 

 

 

Phone Smart GSM Power Socket

This tri-frequency/tri-band GSM smart power socket has manual control, state checking function and power-off memory function other than phone call remote control and SMS remote control.

Manual Control
Press buttons SW1/SW2/SW3 on the socket directly to remote control the socket. Press SW1, socket 1 is socket 1 is power-on state. Press SW1 again, socket 1 is power-off state. Press SW2, socket 2 is power-on state. Press SW2 again, socket 2 is power-off state. Press SW3, socket 3 is power-on state. Press SW3 again, socket 3 is power-off state. When devices are plugged into sockets, only press buttons on the socket, you can switch on or off those devices.

CHECK command: Check the state of the socket
Edit text message “SN+ Six passwords +CHECK” and send to socket. You will receive the state of the socket. Then you will know the ON or OFF state of each socket.

Power-off Memory Function of Socket
The power-off memory function of socket is default in socket.
The STA 1 light flashes twice after power is on. It means that the state is power-off memory function is saved.
The STA 1 light flashes 4 times after power is on. It means that the state is power-off memory function is not saved.
Power-off state can be changed by the customer. Press SW1 for 12 seconds then release, you can change the current memory state.
Note:
This product can only control power supply on or off and do not have other functions. If some devices don’t have power-off memory function of it, even you want to start it by using this socket, it won’t work immediately. You have to turn on its own switch to restart it.
Reset to default
Press the SET button and SW1 button at the same time for 1 second, the STA1 light will flashes twice slowly. You reset socket successfully.
The previous preset owner number will be deleted and password becomes six zeros: 000000. The three switches are also disconnected.