2013/11/26
Electric Golf Cart Remote Controlling
Question from customer:
My target is to install a remote control system to my electric golf cart. The receiver will be supplied by the 12V/26A of the caddy battery. It will be fixed on the “ON/OFF” switch of the caddy. The transmitter will cut or open the switch. Do you have any suggestions?
Answer:
We recommend the model 1 channel 30A dc remote control kit (S1PX-DC12&C-2). It is 1 channel 30A remote controller with direct current output. You don’t have to supply any power to the controlled device because it will get from powered receiver. It is applied for controlling light, motors, fans, electrically operated doors/ locks/windows/ blinds/cars or other appliances with DC12. The working distance is about 100m, but if you want to prolong control distance, you can add an external extended antenna.
The wiring is very easy. Your switch is connected to “+&-” OUT terminals on the receiver. And supply DC power to another “+&-” terminals of the receiver.
And you will get a handy transmitter with 2 buttons. We recommend you can set Latched Mode for this controlling. Press button 1, start golf cart; press button 2, stop golf cart.
My target is to install a remote control system to my electric golf cart. The receiver will be supplied by the 12V/26A of the caddy battery. It will be fixed on the “ON/OFF” switch of the caddy. The transmitter will cut or open the switch. Do you have any suggestions?
Answer:
We recommend the model 1 channel 30A dc remote control kit (S1PX-DC12&C-2). It is 1 channel 30A remote controller with direct current output. You don’t have to supply any power to the controlled device because it will get from powered receiver. It is applied for controlling light, motors, fans, electrically operated doors/ locks/windows/ blinds/cars or other appliances with DC12. The working distance is about 100m, but if you want to prolong control distance, you can add an external extended antenna.
The wiring is very easy. Your switch is connected to “+&-” OUT terminals on the receiver. And supply DC power to another “+&-” terminals of the receiver.
And you will get a handy transmitter with 2 buttons. We recommend you can set Latched Mode for this controlling. Press button 1, start golf cart; press button 2, stop golf cart.
2013/07/31
High Power Motor Remote Model
It is designed to control DC motors of rolling
blinds / doors, projection screens, awnings, pumps, winches, conveyors or other
appliances and mechanicals with voltage DC12V / 24V. The maximum working
current is 30amp. So you will be satisfied with it. You can rotate the motor in
positive or reversal direction with the transmitter (remote control) from any
place within a reliable distance (within 500m/ 1500ft); the wireless signal can
pass through walls, floors and doors.
2013/07/12
8-Channel RF Remote Control Kit Controls 4 DC Motors
8 channel rf wireless remote control transmitter & receiver operates in 8 working modes. It can be used to control at most 8 on / off electrical devices. Widely applied to control every kinds of lights, electrically operated doors / gates / windows / blinds and so on.Here we use it to control 4 dc motor to rotate in positive and reverse direction.
订阅：
博文 (Atom)