We are about to recommend remote controller which is applied to both motor and lamp. It is DC12V momentary &toggle remote controller (S1F-DC12 & C-3-2), which features in motor forward-reverse capability. You can rotate the motor in positive or reversal direction by transmitter from any place within a reliable distance, wireless signal pass through walls, floors and doors. It is suitable for the motors of rolling blinds / doors, projection screens, awnings, pumps, winches, conveyors or other appliances and mechanicals with voltage DC12V. We also design lamp controlling function so that you can control motor and lamp with the same transmitter.
2014/07/31
2014/07/22
Wireless Wall Switch and AC Receiver Remote Control Home Lamp
We made a remote control kit which consists of a wall-mounted switch and a remote receiver (S1X-AC220&HR-1).
When we use ordinary switch to switch home appliances off and on, we should do some wiring for home appliances, some time it is very complicated and time- consuming. Our RF wireless wall mounted switch looks like universal switch from appearance, but it is wireless and operate by RF signal that can pass through walls, floors and doors. It is can be simply affix to any place you want by double faced adhesive tape.
Through RF signal, you don’t have to wire between switch and appliances. Wall-mounted switch works with remote receiver to remote control ac lamp.
Here is the wiring diagram.
Wire ac lamp to OUTPUT of receiver. And add power supply to receiver. This kind of receiver is designed for AC output terminals so that lamp can get power from output terminals of receiver directly.
Setting different control modes (We usually set toggle for lamp controlling.)
Setting control mode Toggle: Only connect Jumper-2.
Press button: Turn on the relay, terminal OUT outputs AC power, turn on lamp.
Press button again: Turn off the relay, terminal OUT no output, turn off lamp.
When we use ordinary switch to switch home appliances off and on, we should do some wiring for home appliances, some time it is very complicated and time- consuming. Our RF wireless wall mounted switch looks like universal switch from appearance, but it is wireless and operate by RF signal that can pass through walls, floors and doors. It is can be simply affix to any place you want by double faced adhesive tape.
Through RF signal, you don’t have to wire between switch and appliances. Wall-mounted switch works with remote receiver to remote control ac lamp.
Here is the wiring diagram.
Wire ac lamp to OUTPUT of receiver. And add power supply to receiver. This kind of receiver is designed for AC output terminals so that lamp can get power from output terminals of receiver directly.
Setting different control modes (We usually set toggle for lamp controlling.)
Setting control mode Toggle: Only connect Jumper-2.
Press button: Turn on the relay, terminal OUT outputs AC power, turn on lamp.
Press button again: Turn off the relay, terminal OUT no output, turn off lamp.
2014/07/02
Wireless Motor Controller for Linear Actuator Motor
“I need a linear actuator to hook to my home automation. I control my large saltwater tank via this system. I want to achieve:
Small actuator on cabinet door
When I turn an outlet on that it’s plugged into actuator opens
Ability to turn outlet off and actuator closes”
Answer:
“You can use our controller- low current triggered transmitter (CB-2V) and forward-reverse-stop receiver (S1FC-DC12). The transmitter is low-current triggered. When input DC power 5~28V, the transmitter is triggered and then transmits an rf signal “ON”. When stop inputting DC power, the transmitter is triggered and then transmits an rf signal “OFF”. This DC RF motor remote control features in forward-reverse-stop capability. You can rotate the motor in positive or reversal direction by transmitter from any place within a reliable distance, wireless signal pass through walls, floors and doors. It is suitable for the motors of rolling blinds / doors, projection screens, awnings, pumps, winches, conveyors or other appliances and mechanicals. Remote distance is up to 500M.
Firstly, we connect transmitter to a 12V power adapter and plug to adapter the outlet, and secondly, connect the receiver to the linear actuator motor. Linear actuator motor is wired to UP and DOWN terminals of receiver. Finally, add power supply to receiver.
When you turn the outlet on, the transmitter sends a signal “ON” to the receiver, then actuator shaft extends.
When you turn the outlet off, the transmitter sends a signal “OFF” to the receiver, then actuator shaft retracts.”
Small actuator on cabinet door
When I turn an outlet on that it’s plugged into actuator opens
Ability to turn outlet off and actuator closes”
Answer:
“You can use our controller- low current triggered transmitter (CB-2V) and forward-reverse-stop receiver (S1FC-DC12). The transmitter is low-current triggered. When input DC power 5~28V, the transmitter is triggered and then transmits an rf signal “ON”. When stop inputting DC power, the transmitter is triggered and then transmits an rf signal “OFF”. This DC RF motor remote control features in forward-reverse-stop capability. You can rotate the motor in positive or reversal direction by transmitter from any place within a reliable distance, wireless signal pass through walls, floors and doors. It is suitable for the motors of rolling blinds / doors, projection screens, awnings, pumps, winches, conveyors or other appliances and mechanicals. Remote distance is up to 500M.
Firstly, we connect transmitter to a 12V power adapter and plug to adapter the outlet, and secondly, connect the receiver to the linear actuator motor. Linear actuator motor is wired to UP and DOWN terminals of receiver. Finally, add power supply to receiver.
When you turn the outlet on, the transmitter sends a signal “ON” to the receiver, then actuator shaft extends.
When you turn the outlet off, the transmitter sends a signal “OFF” to the receiver, then actuator shaft retracts.”
订阅：
博文 (Atom)