315Mhz/433Mhz 9v Remote Controller for Electron Microscope’s Motors

Question from customer:
I use a manual switch to control 4 9V motors of my electron microscope and each motor works in 150ma (0.15a). In addition, only one motor works when I press button of remote control each time. Now I want to remote control them, have you got any suitable remote for me?
Electron microscope:

Manual Switch of microscope:

Answer:
We thought this 8 channel rf remote transmitter & receiver is very suitable for you . It can be used to control at most 8 on / off electrical devices. With characteristics of strong anti-interference, reverse power protection and over current protection. Three voltages dc9v, dc12v and dc24v are provided to choose. It is widely applied to control many kinds of lights, electrically operated doors / gates / windows / blinds and so on. It works with 8-button transmitter and their transmitting distance can reach to 500m.

This is the wiring diagram.

Wire each motor to the normally open terminal “B”. According to the diagram, you can do wiring like above. Even though there are 8 working modes in it, you can choose ”Momentary mode” which is applied in motor’s rotation.
Control mode Momentary (Channel 1~8): Press and hold -> On; Release -> Off.

Press and hold button 1: Motor 1 rotates in positive direction
Release button 1: Motor 1 stops rotation
Press and hold button 2: Motor 1 rotates in reverse direction
Release button 2: Motor 1 stops rotation

Press and hold button 3: Motor 2 rotates in positive direction
Release button 3: Motor2 stops rotation
Press and hold button 4: Motor 2 rotates in reverse direction
Release button 4: Motor 2 stops rotation

Press and hold button 5: Motor 3 rotates in positive direction
Release button 5: Motor 3 stops rotation
Press and hold button 6: Motor 3 rotates in reverse direction
Release button 6: Motor 3 stops rotation

Press and hold button 7: Motor 4 rotates in positive direction
Release button 7: Motor 4 stops rotation
Press and hold button 8: Motor 4 rotates in reverse direction
Release button 8: Motor 4 stops rotation

Only one motor works when you press the corresponding button on the remote.

220V Transceiver Turn on/off LED Lamp Via Transformer

Question from customer:
I want to put a 220v Transceiver to turn on / off the power of a transformer of led lighting (to avoid the transformer is always on), this will make me a remote control switch. I want a basic on / off function product.
Answer:
1 channel ac power direct output remote switch (S1X-AC220+C-2) is suitable for you. Its remarkable feature is ac power direct output, that is to say, you don’t have to supply additional power to being controlled device because it can get power from powered receiver. It controls lights, motors, fans, electrically operated doors/locks/windows/blinds/cars or other appliances with AC 100~240V range. You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance (about 100m); the wireless RF signal can pass through walls, floors and doors.

Wiring diagram is here. Wire transformer to L&N terminals of “OUT “ terminal. Then wire lamp to the transformer.

To avoid transformer being always on, you can use transmitter to remote control it. There are three working modes in it. They are toggle, momentary and latched modes. Here, you can choose latched because there are two buttons of transmitter.
Setting control mode Latched: Do not connect Jumper-1 and Jumper-2.
Press button 1: Turn on the transformer, terminal OUT outputs AC power to switch on lamp.
Press button 2: Turn off the transformer, terminal OUT no output to switch off lamp.

1 Channel AC Remote Controller for Contactor

Someone would like a remote control to switch on and off his lamp via controlling a contactor. He drew a picture to illustrate his idea. Maybe it is not so convenient to him to remote control lamp directly, so he choose to control his lamp via a contactor.

We recommend him a 1 channel AC remote switch with memory function (S1MU-AC220+C-2). This 1 channel ac rf memory remote controller operates in toggle, momentary and latched control mode (set the mode as you like freely). With function of memory, if the power is cut off, the relay will return automatically to the previous status after the power is restored. It is great for hard to reach lights or other electrical devices, remote distance up to 100m (theoretically). It is applied to control lights, motors, fans, electrically operated doors / locks / windows / blinds / cars or other appliances with voltage AC 110~240V or DC 0~28V.

According his requirement, we have this following diagram. Initial state: A, B = Normally Closed; B, C = Normally Open. Wire contactor to normally open contact B&C terminals. And Wire a lamp to contactor and install a switch for lamp (See the original picture).

There are 3 working mode of remote control. They are toggle, momentary and latched modes. We suggest that he should set latched mode because this remote works with a 2-button transmitter.
Setting control mode Latched: Do not connect Jumper-1 and Jumper-2.
Control mode Latched: Press -> On, another relay Off; Press another button -> Off.
Press button 1: Turn on the contactor to turn on lamp (connect B and C, disconnect A and B)
Press button 2: Turn off the contactor to turn off lamp(disconnect B and C, connect A and B)

0~28V or 110V~240V Device is Remote Controlled by 8 Transmitters and One Receiver

Question from customer:
I want to install a set of wireless remote controls, include 8 transmitters in 8 different places (max. 500 m) and one receiver in a specific location. The transmitter transmits a wireless signal to control a closed contact.
Answer:
We recommend normally open/closed contact toggle remote control (S1T-DC12-ANT2+CB-1). According to your requirement, you can choose 8 transmitters (CB-1) to work with the receiver. There are normally open/closed contacts in it which are able to connect device activated by DC 0~28V or AC110~240V. With external extended antenna, its working distance has reached 2000M in the open field. You can use 8 transmitters to remote control receiver from different directions.

This kind of remote control is activated by DC12 power supply. Toggle Mode is the only working mode of it. Here is the wiring diagram. Initial state: A, B = Normally Closed; B, C = Normally Open. Wire your device to normally closed contact A&B terminals. If you do this, your device is turned on always, that is to say, your device will on work all the time.

When you press button on the transmitter (connect B and C, disconnect A and B), turn off device; When you press button again (disconnect B and C, connect A and B), turn on device.

Remote Control 2 Lamps 100M 3 A—Latched Mode

When you want to remote control one more AC devices, you may think about 2 channel remote receiver. This kind of Latching 2 channel remote switch (S2L-AC110~240V + C-1) may be suitable for you. It is activated by AC110V~240V power supply, so being controlled devices will get power from powered receiver. The maximum current output is 3 ampere. The Coding type of receiver is learning code. You can remote control any electric devices within 100M (No obstacles).

Look at the following wiring diagram. We try to introduce 2 lamps controlling of this kind. First, we connect the neutral wire to the terminal “1”, and the live wire to the terminal “2”. Second, we connect the lamp 1 to the terminal “5” and the neutral wire. Third, we continue to connect the lamp 2 to the terminal “4” and the neutral wire.

Latching mode is the only working mode of this remote. So we can do the following operation.
1) Press button C: Turn on the lamp 1, turn off the lamp 2.
2) Press button B: Turn on the lamp 2, turn off the lamp 1.
3) Press button A: Turn off the lamp 1 and the lamp 2.
You can remote control any AC electric appliances other than lamps. It is very convenient to you because you don’t have to supply any power to controlled appliances.

Latched Mode Remote Controller for Lamp Controlling

The 1 channel Latched mode RF remote control operates in AC110V ~220V and 315/433MHz. Through retrofitting, this kind of remote control made a little changes compared with the original remote. Two kinds of receiver style, one is AC 110V (AC 100~120V), widely used in US, Canada…; the other is AC220V (AC 200~240V), used in UK, France…. The Coding type of receiver is learning code. Maximum working current for each channel is 3 ampere instead of 4 ampere of original one. The working distance is 100M.

You can control on/off, open/close of universal electrical devices. Applications include gate remote control, motor remote control, garage door remote control, light remote control, etc. We will take ac light remote controlling for an example. Look at the following wiring diagram. From the interior analogue circuit, we connect the neutral wire to the terminal “1”, and the live wire to the terminal “2”. And then connect the lamp to the terminal “5” and the neutral wire.

Latched mode is the only working mode of it. As regards the latched mode, it is motivated by relay group. (Latched (Press button 1-> On; Press button 2 -> Off)) So we prepare a 2-button transmitter for you to remote control it. All you need to do is just press slightly the button on the remote. You press button 1 to turn on lamp; press button 2 to turn off lamp.

How to Use a Mobile Phone to Remote Control Home Appliances

Question from customer:
I was hoping to be able to use a device to turn on my heating and light at home when I am at work.
Answer:
We recommend you wireless telephone remote control module (TC-01). You just need to make a telephone call, you can remote control your home appliance when you are at work. It can control variety of home appliances and electronic products in any place worldwide by fixed telephone or mobile phone. The range of application is lights, TVs, motors, fans, cameras, video/ audio signals, electrically operated doors/ locks/ windows/ curtains/ bell or other equipments with voltage AC 110~240V or DC 0~48V. It also has password protection which can avoid being used by other people.

Here is the wiring diagram and picture. Telephone line is plugged into the telephone socket on the telephone remote control module. Remote control module should be supplied power. Connect heating and lamp to two relays.

Operation method:
1)Dial the number of fixed telephone at your home with mobile phone, the telephone could be connected automatically after 6 ringing (about 33 seconds).
2)Input the preset password “5678″ to enter into the menu. (Protective password makes it different from ordinary telephone call. If you don’t input password when the telephone put through, you cannot control the remote module.). Modify the password (4 bits): Press button “*” + “new password” + “*”.
3)Press button 1 of mobile keyboard, turn on the lamp. Press button 2 of mobile keyboard, turn off the lamp.
Press button 3 of mobile keyboard, turn on the heating. Press button 4 of mobile keyboard, turn off the heating.
4)Press button “#”, ring off. (If you do not press button “#”, the telephone will hang up automatically after 75 seconds.)
The remote controlling of your heating and lamp in your house when you are at work has realized easily. You can dial telephone call when you nearly arrive home to turn on lamp and heating, turn off it after your arrival. That is very convenient.