1 Remote Transmitters & 6 RF Receiver used for opening or closing 6 awnings

My aunt manages a sidewalk cafe. When the dazzling and hot sun shining or drizzling day and shower coming, awnings should be opened for her customers. So she needs a remote controller to control those 6 awnings without going everywhere.

She selected this remote control kit.

She wants this kit to be like this:

She said to me that each of the receivers should learn code from the transmitter so that every two buttons on the transmitter can control each receiver.

Each motor of the awning should be connected to the receiver one by one. Every receiver should be connected to the power supply.

When she presses button 1, with the motors of awning 1 working continuously in “UP” direction, awning 1 goes up slowly. Release button 1, the motor stops. Press button 2, the motors of awning 1 goes to “Down” direction. When pressing and releasing button 3& button 4, we can control awning 2…When pressing and releasing button 11&button 12, she can control awning 6. My aunt is very satisfied with those remote control kit.

How do you know when the truck tips your garbage bin outdoor with RF vibration detector

I just want to use wireless remote controller to attach his garbage bin outside. When the truck picks up the bin and tips garbage, the controller will detects and turns up a light in the house. So I can know that the garbage is taken away. It sounds a very innovative idea. I have no idea to realize it?So I searched on the internet and asked a remote control supplier, they select a remote control kit for me. That is model 0020259 & model 0010032 (S1DA-AC220 & W-12). They are the remote control kit with functions of vibration reminder and time delay.

They told me that W-12 is an RF vibration detector. When the item is vibrated, the vibration detector will be triggered and will send signal to the receiver to instruct the device to work. S1DA-AC220 is a receiver with a timer.

It looks like great.

With the procedure they shown,  I stick the detector to the garbage bin and pull out the antenna. (To see the following picture)

Then I begin to wire. The power supply should be connected to the N&L terminal of the receiver. Wires from the light should be connected to B&N terminal of the receiver. Then I  use another wire connect to C&L terminal of the receiver. (Wire as the wiring picture they show me)

The operation time came,  I press buttons of “＋” and “－” on the timer to adjust delay time. I set 5 minutes for this timer.

When the truck comes and picks up the garbage bin, the garbage bin is vibrated so that the vibration detector is triggered and the light will shine and last for 5 minutes. Then the light will turn off automatically after 5 minutes. With shining of light, I know that the garbage truck tips garbage into truck and takes away. I like this little , useful, handy gadget.

 

Wireless remote control computer power switch on and off

I am looking for  a remote controller to switch on my computer.  When I press the button on the remote controller, the computer will turn on immediately. So I search on the internet and found this set of controller is favorable for me. It’s the Model 0020002, S1M-DC12 & C-1. How does it work? Let me show you the simple processing.
This set of remote controller:

The wiring processing is very simple.

Step 1，open the computer and find two wires of switch on computer(see the following picture).

Step 2, Wires should be connected to B&C terminal of the receiver; The receiver should be connected to the power supply.

Step 3, Two wires from B&C terminal of receiver should be soldered to switch wires.

 

Step 4, Press button, and turn on the computer.

Step 5, Press and hold button for 5 seconds then release, turn off the computer.

 



 

Look， that‘s so easy.