Someone has 4 small lighted exterior signs around a pharmacy building and would like to control all four signs to go on and off by a simple RF system switch. He is wondering whether this is possible or not?
He can order 4 receivers for light control model of S1X-AC220-ANT2 and one long range remote transmitter CB-4. All lights are respectively installed to each receiver for longer remote distance.
The theoretical transmitting distance is 2000m (6000FT) in the open field. Even though in actual operation, it is hindered by trees, walls or other obstacles, or interfered by other signals. It is still enough for the exterior signs around the building.
4 lighted signs should be wired to 4 receivers’ L&N terminals individually. Wiring diagram as shown below:
Press button “A”, switch sign 1 on and off.
…
Press button “D”, switch sign 4 on and off.
He can order 4 receivers for light control model of S1X-AC220-ANT2 and one long range remote transmitter CB-4. All lights are respectively installed to each receiver for longer remote distance.
The theoretical transmitting distance is 2000m (6000FT) in the open field. Even though in actual operation, it is hindered by trees, walls or other obstacles, or interfered by other signals. It is still enough for the exterior signs around the building.
4 lighted signs should be wired to 4 receivers’ L&N terminals individually. Wiring diagram as shown below:
Press button “A”, switch sign 1 on and off.
…
Press button “D”, switch sign 4 on and off.
没有评论:
发表评论