Why RF Remote Controller

Why RF Remote Controller

2 Channel Power Outage Memory Function Remote Controller

We recommend this 2 channel power-off memory function remote controller (S2MU-DC06/09/12/24 & C-2). It can work in 4 kinds of voltage, 6V, 9V, 12V and 24V. There 4 working modes in it. You can switch as you want through connection or disconnection of jumpers. It controls lights, motors, fans, electrically operated doors / locks / windows / blinds / cars or other appliances with voltage AC110~240V or DC0~28V. It is great for hard to reach lights or other DC/AC electrical devices. The working transmission is about 100m in the open field. With function of memory, if the power is cut off, the relay will return automatically to the previous status after the power is restored.

We’d like to show the wiring and controlling of ac, dc lamps.
The contact of relay of each receiver is normally open/ closed. So you need to wire ac lamp or dc lamp to normally open contact B&C and supply AC 220V power or dc power to lamp.



Usage:
Setting control mode Toggle: Only connect Jumper-2.
Control mode Toggle: Press -> On; Press again -> Off.
Setting control mode Momentary: Only connect Jumper-1.
Control mode Momentary: Press and hold -> On; Release -> Off.

Setting control mode Latched: Do not connect Jumper-1 and Jumper-2.
Control mode Latched: Press -> On, another relay Off; Press another button -> Off.

Setting control mode Momentary + Toggle: Connect Jumper-1 and Jumper-2.
Control mode Momentary (Channel 1): Press -> On; Press again -> Off.
Control mode Toggle (Channel 2): Press and hold -> On; Release -> Off.

Wireless Remote Control Motor

Item link:
http://www.ourautomation.com/ac-100240v-motor-momentary-remote-control-transmitter-receiver-p-1505.html

www.ourautomaton.com

How to Remote Control 4 Lamps from Different Places

One of our customers wants a simple wireless remote operate 4 led lamps from several room at his house. He needs 4 transmitters and a receiver which can be mounted in a designated place. The remote must work from receiver about 50m away and not line of sight through doors and walls.
We suggest him choose dc 4 channel remote control system (S4C-DC12& 4C-1). Maximum working current is 5amp each relay. Working distance of remote and receiver set is about 100m (300ft) in open field. This 4CH 6V9V/12V/24V wireless remote switch operates in toggle, momentary, latched, toggle + momentary control mode (set the mode as you like freely). Easy to install and operate. Just press slightly the button on the remote, you can control universal DC/AC electrical devices. The RF signal can pass through walls, doors and other barriers. As he said, we will set 4 transmitters and this receiver with same 8-bits code in advance so that they can work together.

Operation modes:

• 1) Setting control mode Latched: Disconnect Jumper-1 and Jumper-2.

Control mode Latched (Relay 1~4): Press -> On, other relays Off; Press other button -> Off.

• 2) Setting control mode Momentary: Only connect Jumper-1.

Control mode Momentary (Relay 1~4): Press and hold -> On; Release -> Off.

• 3) Setting control mode Toggle: Only connect Jumper-2.

Control mode Toggle (Relay 1~4): Press -> On; Press again -> Off.

• 4) Setting control mode Momentary + Toggle: Connect Jumper-1 and Jumper-2.

Control mode Momentary (Relay 1, 2): Press and hold -> On; Release -> Off.
Control mode Toggle (Relay 3, 4): Press -> On; Press again -> Off.
We will show you how to remote control 4 led lamps from different places.