We are about to recommend remote controller which is applied to both motor and lamp. It is DC12V momentary &toggle remote controller (S1F-DC12 & C-3-2), which features in motor forward-reverse capability. You can rotate the motor in positive or reversal direction by transmitter from any place within a reliable distance, wireless signal pass through walls, floors and doors. It is suitable for the motors of rolling blinds / doors, projection screens, awnings, pumps, winches, conveyors or other appliances and mechanicals with voltage DC12V. We also design lamp controlling function so that you can control motor and lamp with the same transmitter.
2014/07/31
2014/07/22
Wireless Wall Switch and AC Receiver Remote Control Home Lamp
We made a remote control kit which consists of a wall-mounted switch and a remote receiver (S1X-AC220&HR-1).
When we use ordinary switch to switch home appliances off and on, we should do some wiring for home appliances, some time it is very complicated and time- consuming. Our RF wireless wall mounted switch looks like universal switch from appearance, but it is wireless and operate by RF signal that can pass through walls, floors and doors. It is can be simply affix to any place you want by double faced adhesive tape.
Through RF signal, you don’t have to wire between switch and appliances. Wall-mounted switch works with remote receiver to remote control ac lamp.
Here is the wiring diagram.
Wire ac lamp to OUTPUT of receiver. And add power supply to receiver. This kind of receiver is designed for AC output terminals so that lamp can get power from output terminals of receiver directly.
Setting different control modes (We usually set toggle for lamp controlling.)
Setting control mode Toggle: Only connect Jumper-2.
Press button: Turn on the relay, terminal OUT outputs AC power, turn on lamp.
Press button again: Turn off the relay, terminal OUT no output, turn off lamp.
When we use ordinary switch to switch home appliances off and on, we should do some wiring for home appliances, some time it is very complicated and time- consuming. Our RF wireless wall mounted switch looks like universal switch from appearance, but it is wireless and operate by RF signal that can pass through walls, floors and doors. It is can be simply affix to any place you want by double faced adhesive tape.
Through RF signal, you don’t have to wire between switch and appliances. Wall-mounted switch works with remote receiver to remote control ac lamp.
Here is the wiring diagram.
Wire ac lamp to OUTPUT of receiver. And add power supply to receiver. This kind of receiver is designed for AC output terminals so that lamp can get power from output terminals of receiver directly.
Setting different control modes (We usually set toggle for lamp controlling.)
Setting control mode Toggle: Only connect Jumper-2.
Press button: Turn on the relay, terminal OUT outputs AC power, turn on lamp.
Press button again: Turn off the relay, terminal OUT no output, turn off lamp.
2014/07/02
Wireless Motor Controller for Linear Actuator Motor
“I need a linear actuator to hook to my home automation. I control my large saltwater tank via this system. I want to achieve:
Small actuator on cabinet door
When I turn an outlet on that it’s plugged into actuator opens
Ability to turn outlet off and actuator closes”
Answer:
“You can use our controller- low current triggered transmitter (CB-2V) and forward-reverse-stop receiver (S1FC-DC12). The transmitter is low-current triggered. When input DC power 5~28V, the transmitter is triggered and then transmits an rf signal “ON”. When stop inputting DC power, the transmitter is triggered and then transmits an rf signal “OFF”. This DC RF motor remote control features in forward-reverse-stop capability. You can rotate the motor in positive or reversal direction by transmitter from any place within a reliable distance, wireless signal pass through walls, floors and doors. It is suitable for the motors of rolling blinds / doors, projection screens, awnings, pumps, winches, conveyors or other appliances and mechanicals. Remote distance is up to 500M.
Firstly, we connect transmitter to a 12V power adapter and plug to adapter the outlet, and secondly, connect the receiver to the linear actuator motor. Linear actuator motor is wired to UP and DOWN terminals of receiver. Finally, add power supply to receiver.
When you turn the outlet on, the transmitter sends a signal “ON” to the receiver, then actuator shaft extends.
When you turn the outlet off, the transmitter sends a signal “OFF” to the receiver, then actuator shaft retracts.”
Small actuator on cabinet door
When I turn an outlet on that it’s plugged into actuator opens
Ability to turn outlet off and actuator closes”
Answer:
“You can use our controller- low current triggered transmitter (CB-2V) and forward-reverse-stop receiver (S1FC-DC12). The transmitter is low-current triggered. When input DC power 5~28V, the transmitter is triggered and then transmits an rf signal “ON”. When stop inputting DC power, the transmitter is triggered and then transmits an rf signal “OFF”. This DC RF motor remote control features in forward-reverse-stop capability. You can rotate the motor in positive or reversal direction by transmitter from any place within a reliable distance, wireless signal pass through walls, floors and doors. It is suitable for the motors of rolling blinds / doors, projection screens, awnings, pumps, winches, conveyors or other appliances and mechanicals. Remote distance is up to 500M.
Firstly, we connect transmitter to a 12V power adapter and plug to adapter the outlet, and secondly, connect the receiver to the linear actuator motor. Linear actuator motor is wired to UP and DOWN terminals of receiver. Finally, add power supply to receiver.
When you turn the outlet on, the transmitter sends a signal “ON” to the receiver, then actuator shaft extends.
When you turn the outlet off, the transmitter sends a signal “OFF” to the receiver, then actuator shaft retracts.”
2014/06/30
One to Many Series-One Transmitter Remote Control 4 Devices
Question from customer:
“I need to operate 3 or 4 devices separately with 2 momentary functions per each. I need one transmitter to function from approx. 100 – 500m – to work all devices. The devices will operate on a 12volt DC system.”
Answer:
We recommend the 2 channel 2000m wireless momentary receiver (S2M-DC12-ANT2) with external antenna, and the long rang transmitter (CB-2). It can control lights, motors, fans, electrically operated doors/locks/windows/blinds/cars or other appliances with AC110~240V or DC0~28V. You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors. It is momentary mode (Press and hold→On; Release→Off). External Extended antenna, its transmitting can reach about 2000m.
You can wire 4 devices to each relay of two receivers respectively. Two receivers and this transmitter will be set the same code. This receiver is NO/NC contact. Wire device to B terminals to each relay. And supply power to receiver your device respectively.
1) Press and hold big button: Turn on relays on the first receiver (connect B and C, disconnect A and B)
2) Release big button: Turn off relays on the first receiver (disconnect B and C, connect A and B)
3) Press and small button: Turn on relays on the second receiver (connect B and C, disconnect A and B)
4) Release small button: Turn off relays on the second receiver (disconnect B and C, connect A and B)
“I need to operate 3 or 4 devices separately with 2 momentary functions per each. I need one transmitter to function from approx. 100 – 500m – to work all devices. The devices will operate on a 12volt DC system.”
Answer:
We recommend the 2 channel 2000m wireless momentary receiver (S2M-DC12-ANT2) with external antenna, and the long rang transmitter (CB-2). It can control lights, motors, fans, electrically operated doors/locks/windows/blinds/cars or other appliances with AC110~240V or DC0~28V. You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors. It is momentary mode (Press and hold→On; Release→Off). External Extended antenna, its transmitting can reach about 2000m.
You can wire 4 devices to each relay of two receivers respectively. Two receivers and this transmitter will be set the same code. This receiver is NO/NC contact. Wire device to B terminals to each relay. And supply power to receiver your device respectively.
1) Press and hold big button: Turn on relays on the first receiver (connect B and C, disconnect A and B)
2) Release big button: Turn off relays on the first receiver (disconnect B and C, connect A and B)
3) Press and small button: Turn on relays on the second receiver (connect B and C, disconnect A and B)
4) Release small button: Turn off relays on the second receiver (disconnect B and C, connect A and B)
2014/06/25
Wireless Remote Control Electric Door Locks
Question from customer:
I need one transmitter and 2 receivers that the transmitter operates separately. Preferably 12 volt receivers will work out to 300 yards. I am using the receivers to operate door locks on a project I’m working on.
Answer:
We recommend you 2000m remote control system input & output 12V (S1X-DC12-ANT2&CB-2). One transmitter (CB-2) can pair up with 2 receivers (S1X-DC12-ANT12), so you can use one transmitter remote control two receivers. With external extend antenna, its transmitting distance can reach about 2000m (2187yards) in the open field. It is 12volt actuated, that is to say, electric door lock doesn’t need to be supplied additional power supply because electric door lock will get power from powered receiver.
Wiring is simply easy. Wire your electric door lock to A&B terminals of receiver.
Operation:
Setting control mode Latched: Do not connect Jumper-1 and Jumper-2.
Press big button: Turn on the relay, terminal A&B output DC power, open the door.
Press small button: Turn off the relay, terminal A&B no output, close the door.
I need one transmitter and 2 receivers that the transmitter operates separately. Preferably 12 volt receivers will work out to 300 yards. I am using the receivers to operate door locks on a project I’m working on.
Answer:
We recommend you 2000m remote control system input & output 12V (S1X-DC12-ANT2&CB-2). One transmitter (CB-2) can pair up with 2 receivers (S1X-DC12-ANT12), so you can use one transmitter remote control two receivers. With external extend antenna, its transmitting distance can reach about 2000m (2187yards) in the open field. It is 12volt actuated, that is to say, electric door lock doesn’t need to be supplied additional power supply because electric door lock will get power from powered receiver.
Wiring is simply easy. Wire your electric door lock to A&B terminals of receiver.
Operation:
Setting control mode Latched: Do not connect Jumper-1 and Jumper-2.
Press big button: Turn on the relay, terminal A&B output DC power, open the door.
Press small button: Turn off the relay, terminal A&B no output, close the door.
2014/06/23
Four Transmitter and One Receiver-One to Many Series
Question from customer:
I need a unit that can receive from four transmitters, and switch 4 relays. Each transmitter controls each channel.
Answer:
We recommend the model of 4 Transmitters and 1 Receiver Kit (S4C-DC12 & 4C-1), which belongs to “One-to-many series”. “On-to-many series” include one-transmitter-to-many-receiver system and one-receiver-to-many-transmitter system. It is often used for controlling two or more electrical devices in different places by one transmitter; or one electrical device by two or more transmitters.
If you want to remote control one device with different transmitter from different places, this kit is your better choice.
Here is the wiring diagram for your reference.
The receiver is normally open & closed contact. A,B terminals are normally closed. B,C terminals are normally open. So you can wire your devices to B terminals and negative terminal of power supply. And add DC 0-28V or AC 110-240V to your devices. Supply DC 12V to receiver.
Its transmitting distance is about 100m (in the open field). You can set different working modes according to your need.
1) Setting control mode Latched: Disconnect Jumper-1 and Jumper-2.
Control mode Latched (Relay 1~4):
Press transmitter 1, light 1 ->On; other lights Off;
Press transmitter 2, light 2 ->On; other lights Off;
…
2) Setting control mode Momentary: Only connect Jumper-1.
Control mode Momentary (Relay 1~4):
Press and hold button of any transmitter-> light is on;
Release button -> light is off.
3) Setting control mode Toggle: Only connect Jumper-2.
Control mode Toggle (Relay 1~4): Press button of any transmitter -> light is on;
Press button of any transmitter again -> light is off.
4) Setting control mode Momentary + Toggle: Connect Jumper-1 and Jumper-2.
Control mode Momentary (Relay 1, 2):
Press and hold buttons of transmitter 1 or 2 -> light 1 or light 2 is on;
Release buttons of transmitter 1 or 2 -> light 1 or light 2 is off.
Control mode Toggle (Relay 3, 4):
Press buttons of transmitter 3 or 4-> light 3 or light 4 is on;
Press buttons of transmitter 3 or 4 again -> light 3 or light 4 is off.
I need a unit that can receive from four transmitters, and switch 4 relays. Each transmitter controls each channel.
Answer:
We recommend the model of 4 Transmitters and 1 Receiver Kit (S4C-DC12 & 4C-1), which belongs to “One-to-many series”. “On-to-many series” include one-transmitter-to-many-receiver system and one-receiver-to-many-transmitter system. It is often used for controlling two or more electrical devices in different places by one transmitter; or one electrical device by two or more transmitters.
If you want to remote control one device with different transmitter from different places, this kit is your better choice.
Here is the wiring diagram for your reference.
The receiver is normally open & closed contact. A,B terminals are normally closed. B,C terminals are normally open. So you can wire your devices to B terminals and negative terminal of power supply. And add DC 0-28V or AC 110-240V to your devices. Supply DC 12V to receiver.
Its transmitting distance is about 100m (in the open field). You can set different working modes according to your need.
1) Setting control mode Latched: Disconnect Jumper-1 and Jumper-2.
Control mode Latched (Relay 1~4):
Press transmitter 1, light 1 ->On; other lights Off;
Press transmitter 2, light 2 ->On; other lights Off;
…
2) Setting control mode Momentary: Only connect Jumper-1.
Control mode Momentary (Relay 1~4):
Press and hold button of any transmitter-> light is on;
Release button -> light is off.
3) Setting control mode Toggle: Only connect Jumper-2.
Control mode Toggle (Relay 1~4): Press button of any transmitter -> light is on;
Press button of any transmitter again -> light is off.
4) Setting control mode Momentary + Toggle: Connect Jumper-1 and Jumper-2.
Control mode Momentary (Relay 1, 2):
Press and hold buttons of transmitter 1 or 2 -> light 1 or light 2 is on;
Release buttons of transmitter 1 or 2 -> light 1 or light 2 is off.
Control mode Toggle (Relay 3, 4):
Press buttons of transmitter 3 or 4-> light 3 or light 4 is on;
Press buttons of transmitter 3 or 4 again -> light 3 or light 4 is off.
订阅：
博文 (Atom)